Buy and sell with in Canada, Alberta.
-
1
THESE VINTAGE 1993 -1997 FACTORY DIAGNOSTIC PROCEEDURE MANUALS ARE IN GOOD CONDITION AND COVER AS FOLLOWS
BOOK 1 POWERTRAIN 1997 MODELS
BOOK 2 CHASSIS 1993 TO 1997 MODELS
BOOK 3 BODY 1996-1997 MODELS$55 TAKES ALL THREE
LOCATED 15 MINUTES NORTH OF CAMROSEAB
-
2
Engineering textbooks for ualberta engineering
-
3
THIS 2001 RAM 1500 - 3500 TRUCK SERVICE MANUAL HAS A TORN COVER THAT HAS BEEN REPAIRED BUT BOOK INTACT
$40 TAKES IT
LOCATED 15 MINUTES NORTH OF CAMROSE AB
CAN ARANGE SHIPPING
-
4
THESE 3 MANUALS COVER 1999 DURANGO FACTORY DIAGNOSTIC PROCEDURE
$30 TAKES THEM ALL
LOCATED 15 MINUTES NORTH OF CAMROSE AB
CAN ARANGE SHIPPING
-
5
THIS MANUAL GIVES INSTRUCTION ON REPLACEMENT OF TIMING BELTS FROM 1970 TO 1997 CARS AND TRUCKS
$24 TAKES IT
LOCATED 15 MINUTES NORTH OF CAMROSE
CAN ARANGE SHIPPING
-
6
THESE TWO 2000 RAM TRUCK FACTORY DIAGNOSTIC PROCEDURE MANUALS ARE IN GOOD CONDITION
BOOK 1 CHASSIS .
BOOK 2 POWERTRAIN$40 TAKES BOTH
LOCATED 15 MINUTES NORTH OF CAMROSE AB
CAN ARANGE SHIPPING
-
7
THIS 2000 DODGE DAKOTA 4 BOOK SET COVERS FACTORY DIAGNOSTIC PROCEDURES
BOOK 1 TRANSMISSION
BOOK 2 BODY
BOOK 3 CHASSIS
BOOK 4 SERVICE MANUAL$48 TAKES ALL FOUR
-
8
THESE 4 MANUALS COVER THE FOLLOWINF FACTORY DIAGNOSTIC PROCEDURES
BOOK 1 CHASSIS
BOOK 2 TRANSMISSION
BOOK 3 BODY
BOOK 4 POWERTRAIN$40 TAKES THEM ALL
LOCATED 15 MINUTES NORTH OF CAMROSE AB
CAN ARANGE SHIPPING
-
9
THIS 2003 DODGE DURANGO FACTORY SERVICE MANUAL IS IN GOOD CONDITION
$40 TAKES IT
LOCATED 15 MINUTES NORTH OF CAMROSE AB
CAN ARANGE SHIPPING
-
10
new in box
comes with complete accessories.
Brand new, 100% Original, 1 year international warranty.
WhatsApp : +254 754 522834
- 11
-
12
Corded, good condition.
-
13
Call us with any questions 250-613-7523
PC-34 Plasma Cutter Product Specifications:
Model: PC-34
- 60A Plasma Cutter (Air)
- DC INVERTER
- Uses Compressed Air needs 40-65 PSI @ 4CFM
- Dual Voltage 110 20amp/220V 30amp 50/60Hz Auto Detection
- Maximum Cut: 1 1/4" @ 4 inches per Minute
- ALL BRAND NEW Transistors/(IGBT)
- Duty Cycle 70% @ 60 Amp
- Power Factor: 0.93
- Efficiency: 85%
- Dimensions: 18.11 x 10.04 x 15.98"
- Pilot Arc
What's In The Box?
- 1 piece x Earth Clamp
- 1 piece x Panasonic P80 torch 12ft
- 2 sets cconsumables
- Regulator & water separator w/ pressure gauge
Ships in 1 day and takes 2-8 days to arrive within Canada
Shipping is a Flat rate of $50 in Canada
We are fully accredited with the BBB (Better Business bureau) https://www.bbb.org/We hold a A+ rating
Check out our website for DEMO videos
https://www.rjrequipmentinnovations.com/product/pc-34-plasma-cutter/
All our units come with a unbeatable 3 year warranty.
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept PayPal, Visa, MC AMEX and Etransfers give us a call 250.613.7523
WE WILL NOT ACCEPT CHEQUES
-
14
Like new drywall bead box with all the plates
-
15
Selling 2 brand new in the box bissett 18ga Brad nailers
$120 each nailer
587-280-3384
Alex
-
16
Mastercraft Heavy-Duty 90.8L Wheeled Tool Box with lift out tray. Measures 30” long x 19” wide x 19” tall. Has 2 lockable lid catches, telescoping handle and 2- 6” diameter wheels.
$100
We are downsizing in preparation for selling and moving. Please check out my other ads.
Reach out anytime for more info.
-
17
Used once
New condition
Comes with manual
Located in Sherwood Park, AB
-
18
Please READ ENTIRE AD!
EMAIL YOUR PHONE # OR NO REPLY, NO TEXTS due to scammers, thanks!
Will CALL you ASAP!
This $1000+ professional chainsaw was purchased last year- has been reliable, amazing on fuel, very powerful for 60+ ccm, 'cuts wood like butter', efficiently !
Note, was backup saw, has only about 10 -15 hrs. with v/g original bar/ chain !
Excellent compression , kept clean, maintained, sharpened chain, ready to rumble!
( FYI- Only ever used Husqvarna semi synthetic 2 stroke and Shell premium fuel at 40:1 mix ).
Reason for sale is just need larger pro. Husqvarna/ Stihl low hours chainsaw over 70 ccm - 95 ccm. for logging old growth/ milling etc... That's the only part trade that MAY consider, upon inspection, otherwise $800 (reduced to $750 cash firm) .
NO phone number, lowballers, scammers etc. will be ignored/ blocked .
No holds, FCFS, by appointment only!
Thanks for genuine interest!
-
19
Lightly used and ready to go. Serious setup here, this XMT can run b8g power https://www.google.ca/url?sa=t&source=web&rct=j&opi=89978449&url=https://www.millerwelds.com/equipment/welders/multiprocess/xmt-450-multiprocess-welder-m00430&ved=2ahUKEwiwh9nc5biDAxWdAjQIHbQqBPsQFnoECAkQAQ&usg=AOvVaw3OWbydPpRIeiXW7L3S-_ng Cones witu wire feeder and full spool of ER70-S2. witu cart.
-
20
2”- 3 1/2 Campbell Hausfeld notched 34 degree framing nailer
-
21
Excellent condition
Comes with 2 handles and lid pulls
High quality
Pick up in Canmore or Banff
If add is up, it’s available
-
22
Bar Fridge. Dimensions 21 x 19 x 32.5
-
23
New and unused
Margaritaville drink concoction and travel bag. This has been taken out of the box but never used. Great for a home bar or to impress others at a party!
I can provide actual pictures but it’s exactly the one here:
https://www.costco.ca/margaritaville-bahamas-frozen-concoction-maker-with-travel-bag.product.100393527.html
These retail for much higher than I’m selling. Local pickup in banff
-
24
Brand New 7800X3D Gaming PC including Alienware AW3423DW QD-OLED monitor - $4200 + shipping
Specs below, all parts are new.
AMD Ryzen 7 7800X3D 4.2 GHz 8-Core Processor
Deepcool LS320 85.85 CFM Liquid CPU Cooler
Asus ROG STRIX B650E-I GAMING WIFI Mini ITX AM5 Motherboard
Corsair Vengeance 64 GB (2 x 32 GB) DDR5-6600 CL32 Memory
Western Digital Black SN770 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive
PowerColor Hellhound Radeon RX 7900 XT 20 GB Video Card
Thermaltake The Tower 100 Snow Mini ITX Tower Case
ADATA XPG CYBERCORE 1300 W 80+ Platinum Certified Fully Modular ATX Power SupplyLink to monitor - https://www.dell.com/en-ca/shop/alienwa ... ccessories
Link to specs here - https://ca.pcpartpicker.com/list/DB6z9c
For some reason partpicker claims the 7900XT is not compatible with the case, however that is incorrect it works great as will up to a 4080 Super or even a 4090 FE.
This is a super powerful 4K system as is but can swap the 7900XT for a 4080 Super for $300 more, can also add another 2TB SSD if required.
The pictures of the monitor are of the one I own, but it gives a good idea of the image quality and brightness as the new one is the same model.
-
25
1.1 GHz Intel Celeron N3350 Dual-Core.
4GB DDR3 RAM
32GB eMMC Storage
500 GB HDD
14" 1366 x 768 Anti-Glare Display.
Integrated Intel HD Graphics 500.
SD Media Card Reader.
802.11b/g/n Wi-Fi | Bluetooth 4.0.
USB 3.0 Type-C
USB 2.0
HDMI.
Windows 11 Pro (64-Bit)
-
26
Vintage IBM PC XT AT & Compatible Desktop Computer Parts. Have a few 8 bit, 16 bit ISA & Vesa bus cards available. Compatible AT motherboard with Harris 80C286-20 CPU. Adaptec AVA-1502AE scsi. USRobotics Sportster Model 0460, SFM-336I-T2 & HT WS 1414IV1 Modem's. Creative Labs Sound Blaster Model 4500, Awe64 Gold 16 bit ISA $270 & AudioTrix 3D with Yamaha XR385 Daughter board. Trident TD9440VL vesa graphics card with SOJ M514260A-70 memory expansion installed. Winbond vesa multi I/O PTI 245 VO & PTI 255W V1.2. Oak Technology Inc. VGA, EGA, CGA & MDA IBM PS2 and compatible video card 256K ram installed res up to 800 x 600 16bit isa. ATi 3Dfx Rage IIc and Rage pro turbo agp. Diamond Stealth 3d 2000 with S3 Virge. Also available 3 memory expansion cards. 8 bit Everex EV165A, 16 bit Everex EV135 & EV125 with multi I/O. All cards fully populated with Siemens 41256-12's. Panasonic JU-475-4A55 5 1/4" $100. The 5.25 Hard drives are a Tandon TM262 & Western Digital WD95044-A. This is far from a complete listing of all the computer parts I have. If you are looking for something else along these lines just message.
-
27
A Complete Cummins Insite Diagnostics System. This includes Cummins Inline Adaptor Kit and cables. Entire System is loaded on Panasonic Toughbook Rugged Computer and on Solid State Drive (SSD)
Package includes.
1. Panasonic Toughbook Rugged Computer with SSD Drive
2. Cummins Insite Complete & Full Version
3. Cummins Calterm
4. Cummins Calibration Files complete 42GB Package loaded inside Insite.
5. MetaFiles for Calterm
6. Cummins Inline Adaptor and Cables Set.
Price: $1850, Please call: 647-539-1640
-
28
Price is obo
-
29
Dell Optiplex 3040 Desktop Computer PC, 3.20 GHz Intel i5 Quad Core Gen 3, 16GB DDR3 RAM, 250GB SSD Hard Drive
-
30
This unit is missing on key from the keyboard as shown in the pics.
Works great and included a mouse as the touchpad buttons are difficult at times.
Great unit and price as been decreased due to these couple of small issues.
Resolution: 1366 x 768
Brand: Lenovo
Operating System: Windows 11 Pro OS
Processor: Core I5 Intel CPU
Graphics Processor: Intel GPU
Touchscreen: Yes
Drive Type: Hard Disk Drive
Available Ports
Ethernet
Biometric Security
Fingerprint Scan
Weight: 1.42 kg
Drive Capacity: 500 GB drive
Screen Size: 12.5 in
Installed Memory: 8 GB RAM
Processor Speed: 2.3 GHz CPU
Battery Life: 20 hours battery life
-
31
2018 MacBook Air 13”
256GB Storage
Intel i5
8GB Ram
Comes with Charge Cord and Power Adapter
Works great, no issues. Bought a new MacBook Air, so I don’t need it anymore.
-
32
Looking for a very good used meter housing for jd 1900
Also looking for a jd brown box !
-
33
Orion ups works great used for back up power but no longer need.
-
34
Good condition, no issues that I have noticed still use it just don’t use it much!
-
35
MOVER WITH A PIckup truck $300
-
36
Silver-coloured tin box with clear window
2.25" x 2.25" x 1" (5.7cm x 5.7cm x 2.54cm)
2.16 oz (61.2 g)
30 favour boxes
Food safe
Tin and PVC
-
37
Brand new cardboard tubes can be used for arts and craft or as rolls to wrap fabric or paper
-
38
From Maui- displayed only.
Great sounding!
Available if listed. Priority given to quickest pick up.
NW Sait area
-
39
We used to have them in our bar downstairs. We don’t the bar anymore, so don’t need candy dispensers.
$18/dispenser.
Pick up in Mackenzie Towne.
-
40
Brand new! Brand new! Brand New with Front and Rear bumper, and include 4 wheels and rims.
-
41
Posted by kiran in buy and sell, hobbies, crafts in Alberta, Calgary. December 2, 2022
-
42
Each skein is 150 grams
Color names are on yellow paper in picture
Available for pickup in New Brighton
-
43
Posted by kiran in buy and sell, hobbies, crafts in Alberta, Calgary. March 19, 2022
-
44
Hey there. I’m selling a 20 year old 18 by 18 Duncan kiln with a 2 year old Skutt wall controller. I’m a practicing potter and simply want to upgrade. The kiln is in amazing shape and the elements have about 60 firings on them. You can still order the elements for this model. Text me with any questions 403 836 7761
-
45
I have a BNIB sublimation oven for sale. I bought it thinking i was going to do sublimation but I changed my mind. Pick up in west edmonton.
-
46
Bought the wrong size for me.
Everything is in there, and it is not opened.
Full motion
- 444 x 275 x 73mm
- 60lbs
- mounting holes fit 400mm x 400mm
- Distance from the wall 79mm - 434mm
Box is ripped is the only problem, hence for the low price.
Shipping for free if you live in Ponoka.
-
47
NEW!
Ultra-durable HDMI cable
-
48
Brand new in box. Never opened
Call or text 7807203413
-
49
Looking to replace my older 2012 40" Sony Bravia LCD TV & Wall mount.
Tv has 2 hdmi ports, 1 usb port, and an audio port.
Wall mount can hold up to a 60" tv
Pick up only.
-
50
HDMI Extender - Transmitter and receiver, 1080P, $30 for the pair
Send HDMI over a Cat 5 cable
Both boxes need a 5V supply ( I have some adapters but not enough)
Not all boxes look exactly like this with the red V. Working when removed, 5-day warranty
Lessard Drive area - West Edm