Buy and sell, Tools with in Canada.
-
1
Average Return on investment when switching to LED is under 18months. That means the initial cost is saved within 1.5 years and pure savings beyond that Upwards of 80% on your power bills. With the rated lifespan of 50,000-100,000 hours, potential savings in the tens of thousands is commonplace for business and commercial purchases.
Visit us at https://levkomlighting.com/Benefits to LED include
**No effect from cold weather
**Instant ON - No Warm-up required
**No delay to full brightness
**Longer Life span up to 100,000 hours
** 5 Year Warranty
** They Use Less power
Some of our products include but are not limited to:
LED High Bay Bulbs/Fixtures DLC certified High Bay Replacement Fixtures starting at Only $239
See an annual Savings of 65% over the current 400W Sodium vapor lights.
LED Replacement bulbs for T8/T12 fluorescent tubes 4ft/18watt Ballast Bypass On sale only $18
8Ft Ballast Bypass Only $50
Linkable Linear Standalone Fixtures, 4ft $37
LED Corn Bulbs = IP64 Waterproof rated
27watt = 300watt incandescent only $45
36Watt bulbs are only $54
54Watt Bulbs are only $79
120W Mogul Base $199
LED Street/Yard lights w/ Dusk dawn sensor
100watt = 400watt Metal Halide, Only $279
150watt LED Yard Light - 500W Metal Halide Only $349
300watt LED Yard Light Only $579 = 1000W Sodium Vapor equivalent
Please contact 306-612-3010 or Toll-Free 1-800-801-2585
All orders shipped next business day from our Saskatoon Warehouse
-
2
FINANCING AVAILABLE - WWW.HOCANADA.COM - 1(844)440-40144
The House of Contractors Inc. WPS Power Screed features a unique blade profile that enables a single operator to quickly and accurately strike off concrete floors using a single blade for both form-to-form and wet screeding. The screed's vibratory action embeds aggregate and reduces air voids, producing a strong dense slab, while eliminating the strenuous, time consuming labor of manual screeding. The screed comes in 2 engine types:
WPSC2 Power Screed - $1099.99 (1-Year Machine Warranty (2-Year Engine Warranty))
WPSH2 Power Screed (Honda Engine) - $1399.99(2-Year Machine Warranty (3-Year Engine Warranty))
Features
- Lightweight and easy to transport, assemble, and operate.
- Specially designed to permit a single operator to quickly and easily level an entire area.
- Handle vibration is minimized with our impact absorbing mounting system to optimize control and operator comfort.
- Superior control is achieved with our responsive handle mounted throttle and on/off switch.
- High frequency vibration disperses and levels concrete without build-up.
- Lightweight, easy to transport to and around job sites.
- Blade design permits cutting and smoothing in a single operation.
- Interchangeable blades with other leading wet screed units.
Screed Blade Pricing (Free Shipping Nation Wide)
- 6.5 Foot $404.99
- 8.5 Foot $514.99
- 10.0 Foot $1129.98
- 11.5 Foot $989.99
- 13.5 Foot $699.99
- 16.5 Foot $1124.99
Screed Blade Pricing (Discounted Local Pick Up Price)
- 6.5 Foot $299.99
- 8.5 Foot $399.99
- 10.0 Foot $499.99
- 11.5 Foot $599.99
- 13.5 Foot $699.99
- 16.5 Foot $799.99
Specs:
- Model: Available in Either WPSC2 or WPSH2 (Honda Engine)
- Engine: GX19 or Honda GX35 (Both Engines are 4 Stroke)
- Horsepower: GX19 2.41 hp or Honda GX35 1.6 hp
- Frequency: 3600 rpm
- Vibrations Per Minute: 8000 vpm
- Blade Material: Strong Rust Resistent T6061 aluminum
- Body Material: Stainless Steel
- Fuel Tank Capacity: 0.65L
- Weight: 29.7 lbs
- Driving system: flexible shaft
Prices Include Free Shipping Nation Wide. (Only Available At HOC)
House of Contractors
1(844)440-4014
www.hocanada.com
-
3
Saw has 20" bar.new chain.not on bar.chain gaurd.runs like new.call for photos
-
4
Runs idols but won’t rev only runs on choke but good parts saw
-
5
never been put on a saw
-
6
Belt drive flywheel included
Great shape was mostly just a back up pump. Stored with caps and plugs
On fluid end, power end looks like new
-
7
Great working DEWALT 20v drill, just don’t need as I bought a hammer drill. This is a bare tool so no battery included.
-
8
Have 1/4” Hex impact drill, angle grinder and a circular skill saw come with 1 battery and charger $125 takes them all.
-
9
Mastercraft retro style box for sale.
Bought new in 2017.
Only used as a home tool box so light use. Has a few minor dents on it but drawers work good.
Have keys for top and bottom with spare keys.
Has basic tools in it and would would like to sell together. If you would like pictures of tools included, let me know.
Don't plan on needing 2 tool boxes anymore so this one needs to go.
Asking $800 OBO, no trades.
-
10
New - no box
Comfort Grip - Keeps hands insulated
Comes with key
2200rpm - 2 gears
Comparable units start at $75
Asking $45
If ad is up, item is available.
-
11
18” bolt cutters. Used but in very good condition
-
12
New (no box)
Comfort Grip - Keeps hands insulated
Lightweight
Comparable units start at $75
Asking $35
If ad is up, item is available
-
13
WEN - Model 8CT
New - never used
Extremely lightweight
Come with foam backing pad and 2 washable bonnets
Comparable units start at $50
Asking $20
If ad is up, item is available.
-
14
Precision Sterrett protractor great for vise work. Also fits in height gauges with wooden box $100.
Starrett depth gauge is excellent for measuring parts write in device metric or English available with fitted case $100 each
Set of three bevelled squares $50 for the set
0 to 3 inch depth Mike made by Goodale Pratt Greenfield Massachusetts, made in USA $80 with case
4 inch strarrett square like new $30. 6 inch starrett square with two additional blades $80
-
15
- We have Powrliner 3500 line striping machines in stock, and can be picked up locally or shipped anywhere in Canada.
We will beat any advertised pricing or estimates!
Free Striping Tips Bonus With Purchase. PLUS Discounted Pricing on Traffic Paint & Stencils
The 3500 was designed for low maintenance operation to save you money, and time.
The unique sealed hydraulic system reduces the need to replace consumable parts such as packings, and clutches. That means less down time, and lower maintenance costs for you and best of all more profitability for your parking lot line painting jobs.The revolutionary PowrLiner™ 3500 line painting machine is built with technology that delivers a best in class stripe with sharp and consistent line quality even on the toughest surfaces.
- Sprays latex and oil based field and pavement marking coatings
- Elite lifetime warranty offered on the hydraulic fluid pump
- PermaStroke™ Technology provides a lifetime of durability with no piston or packings to replace and only has two field serviceable wear parts
- Sealed hydraulic system has no electronics or clutches to burn out
- Sureflo™ Pusher Valve makes priming easy
- FlatLine Pulsation Dampener™ eliminates pressure fluctuations and deadband in the system
- Removable gun allows for full stenciling capability
- No-spill pump filter holds coating in the housing when removing
- Large 16″ pneumatic tires for increased portability over rough surfaces
- New swing back design
- PowrCenter – Easy to use controls, cup holder, tip holder, & phone charger
Specifications - Powrliner 3500
- Part Number - 537015
- GPM | LPM - 0.75 GPM | 2.8 LPM
- Max Operating Pressure - 3300 PSI | 22.8 MPaMax
- Tip Size - 1 Gun - GAS0.027"
- Engine - Honda GX120 with Low Oil Alert
- Weight - 160 lbs
- Items Included - RX-80 Gun, 419 TR1 Line Striping Tip, 1/4" x 50" Airless Hose
- Warranty - 4 Yr Manufacturer's defect, lifetime PMDC motor, limited lifetime dcx motor, 3yr engine, 2yr turbine, lifetime drivetrain, lifetime PermaStroke
Optional add-ons available
- 12 Gallon Paint Hopper
- Laser Kit
- Titan Glass Bead Dispenser
- Parking Lot Stencils
- Stenciling Kit (Extra, gun, wand, hose, holster, and valve)
Ask us about our line painter startup package. We can provide discounted pricing on custom startup kits with pavement stencils, line painting machines, traffic paint, and anything else you need!
Pickup Available in Edmonton
9519-42 Avenue
Edmonton, AB T6E5R2
Contact Mike
587-882-7623
support@roadly.ca
Other Titan Line Painting units available
Powrliner 850 | Powrliner 4955 | Powrliner 6955 | PowerLiner 8955
-
16
New in box
Comfort Grip - Keeps hand insulated
30ft pounds of torque
Mini design for ease in tight spaces
Comparable units start at $90
asking $45
If ad is up, item still available
-
17
Hilti SID 2-A 12V impact driver, Hilti SFD 2-A 12 Vscrew driver, and Hilti SF 2H-A12 hammer drill
All are in nearly new condition since they were used by a homeowner for a few repair jobs in the home.
They are being sold as a set. I am keeping the batteries to use in the Hilti 12V light and the 12V installation driver.
Asking $120. No lowballers.
-
18
Dewalt circular saw blade.
Brand new, in original packaging.
$20 obo
-
19
For sale is a good condition Universal Laser Systems VLS6.75 Laser Engraving Machine. 75W CO2 tube, purchased brand new February 2022.
Includes:
Laser system and 75W tube manufactured Feb 22
2.0 lens installed and 1.5 lens brand new unopened
Honeycomb
Rotary
Box with original manuals, tools, cleaning supplies, test samples
Exhaust system
-
20
Woodmizer LT40HD WIDE sawmill- 2021 With Only 24 Hours, Debarker, Extra Blades!
Here you have an almost new 2021 Woodmizer LT40HD WIDE head portable sawmill with only 24 hours on it. It has the the 26.5 HP engine, Debarker, and 24 blades!! I waited 6 months to get this mill and in the time that I waited for it I relocated out of town and no longer need it. I ran some logs through it for my neighbor and it’s amazing. Cuts fast and accurate and is everything I hoped for. Current order time for this mill from Woodmizer is well over a year so don’t wait and get this one now!
This mill can cut logs up to 21’ long, 36” in diameter and is capable of a 34” wide cut which is perfect for slabs. It has a hydraulic log loader, hydraulic log turner, hydraulic log clamp, hydraulic toe boards for leveling cuts and sliding logs forward along with hydraulic log supports. This mill has the 26.5 HP gas motor which has plenty of power for huge logs. This mill also features electric blade guide adjustment, automatic water and automatic clutch.
-
21
2021 Southern Pride 500 smoker used on trailer. This unit was used for 1 year. It is in immaculate condition and ready for its new home. 90 day warranty included. A smoke extractor can be added to this unit. It can also be converted to natural gas.
-
22
Miller Big Blue 400 Pro Portable Welder Kubota Diesel New.
Engine-Driven Welder
Color Blue
For Material Type Stainless Steel, Steel
Generator Fuel Type Diesel
MIG Welding Maximum Output Current 400 A
MIG Welding Output @ Duty Cycle
300 A @ 32 V,100%, 350 A @ 27 V, 100%, 400 A @ 24 V,100%
Phase Three-Phase
Polaraity DC
Start Type Electric
Stick Welding Maximum Output Current 400 A
Stick Welding Minimum Output Current 20 A
Stick Welding Output @ Duty Cycle 300 A @ 32 V,100%, 350 A @ 27 V, 100%, 400 A @ 24 V,100%
TIG Welding Maximum Output Current 400 A
TIG Welding Minimum Output Current 20 A
TIG Welding Output @ Duty Cycle
300 A @ 32 V,100%, 350 A @ 27 V, 100%, 400 A @ 24 V,100%
Remote Connection Type 14-Pin (Miller)
Welding Mode CC
Welding Processes
Air Carbon Arc Cutting and Gouging (CAC-A), Flux-Cored Welding (FCAW), MIG Welding (GMAW), Stick Welding (SMAW), TIG Welding (GTAW)
Application
Construction, Fabrication, Infrastructure, Maintenance and Repair
Circuit Breaker Yes
Continuous Auxiliary Power 10,000 W
Coolant Tank Capacity 6 qt
Engine Brand Kubota
Engine Model Kubota V1505
Fuel Tank Capacity 11.5 gal
Generator Outlets
20 A 120V GFCI 5-20R (4), 50 A 120/240V 14-50R
Horsepower 20 hp
Model 907732
Oil Capacity 6 qt
Open Circuit Voltage 85 V DC
Overall Depth 56 in
Overall Height 32 in
Overall Width 26.25 in
Peak Auxiliary Power 12,000 W
Series Big Blue 400 Pro
Sound Level 68.7 dB @ 23 ft, 71.6 dB @ 23 ft (Weld)
Standards
CSA Certified
Weight 950 lb
Enhanced Process Pulsed MIG (GMAW-P), RMD
-
23
Epilog Fusion Edge Laser Engraver/ Cutter 60 Watt. 24" x 24" work area (110V).
Manufactured in 2021 Like New everything works great and can be tested.
Includes rotary attachment, air pump, 2 & 4 lens.
-
24
Diedrich Coffee Roaster IR-12 fully automatic with monitor year 2021 Brand New Never Been Used.
-
25
2020 brs line bore setup
C45 boring kit with two 1.75” and one .875” bars.
Small bar kit
Snap ring grove tool
Automatic facing tool
4 bearing mounts
Drill chuck for the end of the bar
Bore measure tool
Digital tool bit adjuster
Lots of miscellaneous carbide and HSS tooling
Some custom tools and miscellaneous things
408i bore welder
Miller 215 welder
This is a great opportunity for someone to get into line boring. Everything works perfectly. You could literally buy this and go straight to a job and have everything you need except calipers.
-
26
Concrete Hammer CH Tools
110V Electric
Good Working Condition
Made in the USA
$275 cash and carry
only serious buyers only - call only no text 905.332.1051
-
27
7” miter saw
-
28
Miscellaneous hand tools. Jig saw drills belt sander etc.
-
29
3 ton Motomaster floor jack
-
30
1bottom tool chest and tool box for the top and all the tool with it
-
31
Brand new in the box. I only opened for pictures. I won this saw and unfortunately I don’t need it. Someone is going to get a great deal.
- Increased power with brushless DC motor
- Increased jobsite durability due to lubricating mechanism and reinforced gear shaft
- Brushless DC motor generates less heat buildup and is ideal for use in prolonged manufacturing / production applications
- eXtreme Protection Technology (XPT) offers maximum protection against dust, dirt and debris for optimal performance in extreme conditions
- Toolless shoe adjustment enables fast and easy adjustment on the jobsite
- 2 speed settings provides ideal settings for wood or metal cutting applications
- Electric brake stops blade immediately after trigger is released for increased operator safety
- Blade ejection lever located on side of tool housing for operator convenience
- Vertical crank mechanism minimizes blade deflection and reduces vibration
- Lighter weight versus 18VX2 models for increased maneuverability and operator comfort
- Retractable sky hook allows tool be hung on rafters, pipes or scaffolding
- Rubber joint construction suppresses transmission of vibration to battery, minimizing battery failures due to terminal breakage or poor electrical contact
- Twin LED job lights with pre-glow and after-glow features illuminates work area
- Ergonomic soft rubber grip design for vibration absorption and comfortable operation
-
32
Work harness
-
33
Used Once, Hi Jack asking $140 retail sale is over $200 in Winnipeg MB
-
34
Comes as shown in the picture
-
35
48 inch square bull float with 8 foot extension
-
36
Never been used
-
37
Laser Levels for sale all good working condition cleaned and tested ready to sell
Dewalt DW08802 $70
Dewalt DW089 $SOLD!!
Dewalt DW0330S $SOLD
Dewalt DW0330S (NEW) $174.50
Bosch GLL40-20G $SOLD
Bosch GLL 30 $79.50
Bosch Professional GLM 30 $34.50
Acculine Pro Laser Level 40-6620 $24.50I am a business located in the Downtown Core of Cambridge!
130 Main St, N1R1V7, 519-621-65ʒ9
Kingspawncambridge@gmail.com
Email, Call, or Come Down
[Our Hours]
[Weekdays - 10am to 5:30pm]
[Saturdays - 11am to 4pm]
[Sundays - Closed!]
-
38
Mastercraft 2 in one air operated Brad Nailer and Stapler. Used once.
Can be picked up in St George or meet in Cambridge
-
39
Mitutoyo universal bevel protractor series 187
-
40
General GP7500E generator with 180 hours
-
41
kingspawn/tool/Dewalt, Milwaukee, Hilti, Makita, Ridgid, Hitachi, Makita, Bosch, Corded, Cordless, Drywall, Screw, gun, Drill, Hammer, Action, Variable Speed, 3/8 , 1/2, 5/8, VSR
[USED CORDED DRILL SELECTION]
Milwaukee Drywall Screw Gun (Model: 6742-20) -40$
Dewalt Drywall Screw Gun (Model: DW272) - 40$
Ridgid 3/8 VSR Drill (Model: R7001) - [45$
Hitachi 5/8 inch Hammer Drill (Model: FDV 16VB2) - 50$
Dewalt 3/8 inch VSR Drill (Model: D21008) - 55$
Dewalt 1/2 inch VSR Drill (Model: DW235G) - 50$
Dewalt 18 gauge Swivel shear Drill (Model: DW890) -60$
Milwaukee Drill (Hammer doesn't work just drill)-40$
Milwaukee Drill(5392-1)-30$
Bosch Bulldog Hammer Drill (Model: 820) - 80$
Milwaukee Hammer Drill (Model: 5378-02) -50$
Hitachi Hammer Drill (Model: DH24PB) -40$
Milwaukee hammer drill-$40
Hitatchi drill-15/16 dh 24pb-$40We are a business so all items have been tested and have our Guarantee!
I am a business located in the Downtown Core of Cambridge!
130 Main St, N1R1V7, 519-621-6539
Email, Call, or Come Down
[Our Hours]
[Weekdays - 10am to 5:30pm]
[Saturdays - 11am to 4pm]
[Sundays – Closed!]We also do Buy/Sell in many Categories, Just give us a call
-
42
Johnson level tool.
-
43
Electric chain hoist, Budgit brand.
-
44
Dewalt impact drill bare tool(DCF887) Blow out sale!! $70 each
-
45
*** Finance Available ****
BRAND NEW WATER/SEPTIC TANK & WATER TANK 1000L/2000L/2500L at the lowest price in the market all over canada and usa 100% customers satisfactionhttps://www.capitalautoequipment.com
1000L $799 (4MM THICKNESS) ST100L
2000L $1199 (7MM THICKNESS) ST200L
2500L $1599 (7MM THICKNESS) ST250L
***** Can be used as a septic holding tank or as a clean water tank *****
Tanks can be single or tanks can be bought in multiple put in a series, connected together to have a higher litre than shown in the ad
Please contact us for more details information and also checkout the manual on our website
CONTACT ONTARIO BRANCH (365) 888-3765/ (365)317-7933
CONTACT BRITISH COLUMBIA BRANCH (604)-314-9755 / (604)674-6050
We are located Hamilton, ON and Surrey, BC
We ship throughout Canadakeywords : septic tank septic tank pumping septic pumping near me septic tank cleaning septic tank pumping near me septic system septic service near me septic tank serviceplastic septic tanks concrete septic tank
-
46
me téléphoner au 819-752-6339
-
47
Niveau de 2 pieds en bois
-
48
Winch à bois ou treuil forestier de marque Wallenstein Bush Pilot FX 110 de 11 000 livres sur PTO 540 + 3 chokers + une attache remorque, câble en Kevlar. Machine comme neuve.
Demande 5 995$ appelle Jean Yves au4️⃣1️⃣8️⃣-9️⃣5️⃣5️⃣-9️⃣0️⃣5️⃣5️⃣ ou écrire en privé.
-
49
Courrois de 6 pieds = 20$
10 pieds = 40$
20 pieds = 60$
10 000 livres
-
50
New
Description
Balayeuse robuste : le balai en métal robuste peut contenir 13,6 kg d'objets ferreux tout en conservant la durabilité
Libération rapide : parfait pour ramasser les clous sur les chantiers, la poignée à ressort permet de libérer et d'enlever facilement les objets métalliques dangereux
Fonctionne dans les espaces confinés : la poignée extensible de 78,7 cm à 114,3 cm offre une maniabilité plus efficace dans les zones confinées
Utilisation sur diverses surfaces : protège les pneus et le trafic des pieds contre les objets métalliques tranchants dispersés sur le béton, le bois, les pelouses, l'asphalte et plus encore
Facile à rouler : facile à rouler sur le sol pour ramasser les pièces métalliques nichées dans la saletéhttps://a.co/d/hLTb5o7