Cars & vehicles, Classic cars with in Canada, Nova Scotia.
-
1
Looking for a clean solid foxbody mustang, not partial to the year. Would prefer an LX but would consider the right GT. I don’t mind mods as long as done right. Body and paint are important. Looking to spend 15-25k depending on the car. Let me know if you have something. No convertibles please.
-
2
Looking for an avanti or avanti II as a project for my daughter and I. Condition doesn’t matter, but would prefer it be drivable. Let me know what you have!
-
3
1993 Ford mustang, mint condition. This car started out in Florida and was purchased by an engineer in Toronto who had built the car.
Around seven years ago, the car was bought to Halifax by a buddy of mine, and I purchased it from him.
The car has a 347 stroker with over 500 HP with a Vortech super charger with 14 lbs of boost. The car has a methyl hydrate system. There was just a brand new TKO 600 Tremac transmission installed along with a new bell housing, clutch, pressure plate, crossmember and yoke.
There was also just put on the car, a new rack and pinion with power steering.
The car has an 8.8 Ford posi rear end with 373 gears and strange axles.
The list goes on and on. This car has the best of everything and is in excellent condition. You will be hard-pressed to find another car like this one.
Asking 38,000.00
902-483-5341
Located in Halifax Nova Scotia
Reason for selling this car is that it just sits in the garage and lost interest in it. Need the space now for other things.
-
4
Looking for a nice 1967 Chevelle SS396
-
5
Beautiful 2 Door Sedan, excellent shape inside and out! Underneath is great! 350 with a TH350 automatic, 10 bolt GM rear differential, AC, power steering, nova front clip, shaved door handles, chopped roof, weld drag light wheels. Car drives great! Located in Charlottetown PEI, delivery possible. Phone calls only please, 9026265781
-
6
*PENDING* !! 1954 chev 1420 series, barn find v-6/auto ,starts drives stops ,have all papers ,good to very good condition ,12500 obo
-
7
*CAR IS LOCATED IN NEWFOUNDLAND*
*Serious inquiries only*Looking to trade this 2000 Mercedes s500 for a classic car of interest. This car is originally out of Florida and is in very good shape needs tires and brake work. I am looking for a classic car in the year range of 1960 to 1980, preferably dodge, ford or chev, Truck car or van Please call 1-709-648-2444 or send an email with pictures of the vehicle to nicholas9271@gmail.com.
-
8
Willing to trade or best offer, no low ball offers. If interested please call 902-430-4242, no text messages or emails.
-
9
Hey here is someone’s chance to own a piece of for gotten history… 1983 AMC Eagle Wagon
258 Inline 6 with automatic transmission
This car is the limited model so that means she got it all for 1983 leather a/c, power windows and locks and even power driver seat wow!
The body is good with a few some surface rust places but nothing that is a big problem that is for sure. frame is great!!!! Under coated
And it is 4 Wheel Drive , I’ll say it again incase u didn’t catch that. It’s Four wheel drive and yes it does work . This is a car to get hard to find in good shape like this and they are not at ever street corner, so come quick before this beauty is gone!!!! Asking 8900 obo car is located in Prince Edward Island
-
10
1984 Chev 3500 dually, 4x4 lockin hubs, with a strong runnin 350 that was freshened up within the last year. Long tube headers, true dual exhaust. The deck is PTO dump, and measures 12 feet long and 7.5 feet wide. Frame & body are good, tires too. Inspected until September. New battery. Great work truck. I drove it 4 hours straight to get it home had no issues at all, its a good old truck for bein nearly 40 years old. Askin $9,500 obo. No trades cash only no pen pals. Email or text/call 902-299-0775.
-
11
Looking for a cab doors and front clip mid 60s down truck building a rat rod don't even need papers let me know what you have
-
12
I am looking for a little, rusty project Fairlane/Galaxie. I'm hoping to only spend around 3-5k but depending of the condition I'd consider going higher.
-
13
1975 Chevrolet Corvette stingray, 350, auto,car works good has lots of recent work in the last couple years including brand new edelbrock carb, edelbrock intake (used), comp cam (extreme energy), lifters, double roller timing chain, alternator, door pins, and lots more in the last few years many parts wasn’t required but wanted to keep reliability for longer drives, was painted a couple years ago didn’t quite get the gloss I was looking for but shows okay minus the t-tops bubbled some (not rust their fibreglass, can include left over paint, interior showing it’s age, but overall great weekend cruiser draws lots of attention, for a serious buyers can uncover and get more pictures if needed and can also take a video of it running, etc, $13,500
-
14
Cars in decent shape, does need some body work , runs strong and mechanically is good, has a 318 with a 4 barrel, which is hooked to a 4spd transmission,
-
15
Looking to buy a squarebody. Have cash in hand. Will look at 2wd or 4x4. Project or complete.
Would also be interested in a Camaro, Nova or chevelle.
Serious buyer with cash in hand. Thank you!
-
16
1968 Camaro 383 stroker M 21, 4 speed, 373 positive traction $46500
-
17
1990 short wheel base truck, all new drivetrain. Brakes, schocks, bearings.
Newer 6 ltr,big valve heads, ls3 camshaft, SStrailblazer intake, stainless steel longtube headers. all-new mufflers and turndomns,. B/M shift kit, corvette survo kit, all in a 700r4 trans. Also have a 5spd set up. Have a Dana 44 posi-trac, ,3:43 gear ratio 4 brand new cooper Cobra tires. Plus a lot of parts,doors and grills , GMC and Chevrolet grills, A Tonneau cover and even a Bluetooth system also have all the paint for the truck. Call Scott for more information 902-521-8338
-
18
Professionally built Fejer Ferrari replica on 1984 Fiero chassis. 350 cubic inch tune port injected engine. These obsolete kits are getting harder to find especially fully complete with V8 engine conversions. All schematic diagrams included. 5 speed manual with stage 3 clutch. Koni shocks. Magnaflow exhaust. Custom C&C cut rear valance. See price list to get an idea how much goes into these cars. Licensed, insured and registered for the road. Car gets lots of attention. Selling due to health issues. Serious inquiries only,no dreamers. Car is in storage until May 1st 2023. New oil change. $19,000 firm. 1-902-212-2874
-
19
S 10 Xtreme 355 5 speed
-
20
New windshield fits 67-69 Camaro and the 67-70 Firebird
-
21
I am looking for a clear title for a Ford Model T any year from 09-27
I am building from parts but have no title
-
22
1980 THUNDERBIRD for sale. Has a 255 V8 motor. only has 40,000 original klm. Has 4 new coker whitewall tires. All new brakes front and back.New am/fm cassette sterio with new speakers. Car is in very good condition. Asking 15,000 OBO. Can store car in my heated garage for this winter. Call Joe at 902-252-2908 or 902-414-5174 willing to trade for something in the 60's year. let me know what you have.
-
23
Looking for a nice 1967 Chevelle SS396
-
24
I am posting this for a friend so please no emails. If interested please call Ron 902-497-2684.
Well kept Ford Galaxy 90% original paint, original interior, front disc power brakes, 390 Cruiseamatic, lots of chrome! Serious buyers only. This is a completely rust free car with never any rust repair. Most of the car still has the original paint. A must see beauty. Asking 34000 or May negotiate trade for 68 or 70 to 340 Dart Duster or a Swinger.
-
25
Not sure the year,
Has pto driven dump cylinder
Best offer
-
26
1950 Chev Rebuilt 216 Motor Runs Nice Put A Lot Of Parts On This Car To Make It A Nice Car It Is Ready For The Road But Could Use A Little Body Work And Paint Or Drive It The Way It Is Body And Under Gear Very Good Winter Special $ 10,000.00 O B O Ph 902 538 7755 Car Is In Berwick
-
27
No frame or running gear ,I have all boby parts.long box.
-
28
1950 Dodge 1/2 ton. it has been stored in Nova Scotia under roof since 2016. I have lost the interest to finish this truck It is a good project truck. Cannot be restored to orginal, it will have to be a resto mod. The body was sand blasted , sitting on a S-10 body, Cargo bed was made to the orginal specs and new steel. Diesel motor on the frame, needs interior, dash instruments, glass, mirrors etc. Registered in Nova Scotia
-
29
Selling my fc, having two cars isnt feasible right now. Car needs an mvi and a new transmission. Body is in good shape for the year. Has a bunch of suspension mods and turbo 2 parts. Lowered on BC coilovers. Interior: Sparco steering wheel, nrg hub, corbeau bucket seats, Asking 6000
-
30
I am reluctantly looking to sell my 1973 240z. I picked this car up a few years back with the intention of restoring it but can never make the time for it. The car ran and drove before I started disassembly. Car is 100% completely there for parts, interior plastics/panels, wiring harness, motor, transmission, all the glass etc...
I have completely disassembled the car other than dash is still in it. All parts were labeled and hardware bagged with picture of most things for reference. This will be a full project for someone that has more time then myself
I'm asking 10,000 OBO for the car as is. No trades
-
31
Looking to purchase 70-74 Cuda or 68-70 Charger, May also consider other Mopars, text or phone 709-689-0672
-
32
Call for info
9027498580
-
33
CORRECTION FOR CLARITY , trade or sell the entire front clip reason changing to Chevy also the all the box except the bed and running boards all in real good shape no patches keeping the cab and doors. (Doors may be going will decide this week) ka
Eeping the drive train making a slow truck the trade is for a high quality leather front seats and matching console. Or may sell
Call for info 902 740 1484 or text
Western truck no rust or patches
-
34
1931 Ford roadster for sale. 4.3l Chev. Auto. Stainless dual exhaust. Runs good.. Fiberglass body. Front disc brakes. Power brakes. Heater.. new top. Bring wheels and tires ( I’m keeping these for another project, 5 x 4.75 bolt pattern ) Too many toys. $16,000
Can possibly deliver around the maritimes for extra
Would take 20 + ft galvanized trailer/car hauler on trade
-
35
1 of 2175.Orginaly from Montana. V8 automatic overdrive .ps,pb.front and rear sway bars.Drives ,runs A-1 ,drove over 5000 miles this year.lots of 1967 only features.small rear window has hand choke ,throttle ,pull up emegrency brake etc.$37500 taxes in.
-
36
Looking for 68 charger fenders , hood , trunk lid, any new sheetmetal rear frame rails etc. Good oem or aftermarket most structure parts same 68-70 . I have some 70 charger parts to trade as well.
-
37
OBO
INCI
Floor, firewall, trunk all
new panels put in. Brand
new gas tank. 350 four
bolt main that has to be
rebuilt with a 350 turbo
transmission. Camaro
front end and pose track
transmission. Have
everything to put
together but two tail Lights.
-
38
Car is in amazing shape has coyote swap
-
39
completely rebuilt from ground up, less than 5000km on rebuild. 351w , 5 speed manual swap , ford 9” rear end. 300hp 300tq
come and see it.
35k cash or trade for a diesel truck
-
40
1952 Jaguar XK 120. This is a factory built reproduction of the famous xk 120, built in Buffalo NY at Eagle Coachworks. Jaguars. I purchased this 15 years ago from a private collection of the doctor who invented the "heart stent". It's powered by a fuel injected 5 liter V8 (Mustang 302 ci) paired with a 5 speed standard transmission. I'm toying with the idea of thinning out my herd and possibly letting this one go. I may consider a trade or partial trade for something interesting.
It includes a removable soft top and side curtain windows. Vehicle permit is titled as a 52 Jaguar XK120
Call or text me at 902-749-6099
-
41
Hi all,
Looking for used /unused new or oem sheet metal for 68 charger, I know all the usual suppliers AMD etc but I'm looking for any that people have tucked away.
Cars rough I need frame rails all around , floor trunk etc.
Have anything or have a lead on some parts please let me know.
I'm restoring this rare 1 of 74 383 2bbrl 4 speeds built. Any help appreciated.
I have extra 70 charger parts to trade as well.
Car has fiberglass 68 fenders I'd like to go back to steel. Need a hood as well.
If you have a rotted charger let me know it may have parts I could use.
Classics like this need to be saved or kids will think Hondas are cool cause they have never felt the rumble of a mopar or the sheer beauty in thier design.
-
42
LOOKING FOR A FRONT BUMPER FOR A 52,53,OR 54 FORD MAINLINE.DOES NOT HAVE TO BE PERFECT.
-
43
Looking for a limited slip differential for a 1984 Oldsmobile cutlass supreme, I am looking for just the gears not the whole rear end. If you are selling one let me know thanks.
-
44
Looking for a turbo parts car for my Nissan 300zx
Message me on here or contact me @ 902-371-6053
-
45
Complete or roller
-
46
1948 Mercury 114 Coupe in beautiful, rust free, original condition. This is a "must be seen
automobile". Looks like it did on the showroom floor. $25000. See Photos and CALLS ONLY for details.
Thanks. 902-565-0677
-
47
1990 fox body drag car. 4 link suspension and 9 inch strange rear end with 40 spline gun drilled axles. Funny car cage, wheelie bars, parachute , rear aluminum spoiler, wilwood 4 piston brakes, fuel cell etc…Car would be sold as a roller. Text or call 9022027893 9000obo
-
48
1935 Ford Roadster (Customized)
351 Cleveland
Auto Trans (Stick Shift)
This car is all (Henry Ford Steel) This is not a fiberglass kit car.
Asking $45,000 Will consider:
Mini Excavator Full or (Partial Trade) depending on condition.
Also will consider a (Partial Trade) for a newer personal watercraft (Seadoo, Bombardier, Yamaha Etc Etc
-
49
I'm looking for either parts or parts car, I would love to get them before the snow flies so I can do some restoring during the winter. Let me know what you have or if you know where I might be able to get some parts or whole car.
-
50
i have parts for a 1955 ford truck phone 1 902 849 4037