Cars & vehicles, Heavy equipment with in Canada, Nova Scotia.
-
1
Very good condition John Deere 4045DF150 with rockford 4-11256 (twin disk) clutch power unit.
ONLY 2500hrsShipping available
-
2
Attachments for all makes and models of Excavators
MADE IN CANADA
2 Year WarrantyAttachments Available:
Ditch Cleaning Buckets
HD Tooth Buckets
Twist/Tilt Buckets
Extreme Duty Rock Buckets
Root Rakes
Skeleton Buckets
Hydraulic Thumbs
4 in 1 Buckets
Trapezoidal Buckets
Mechanical Concrete Pulverizers
Chuck Blades
Couplers (Pin Grab, Wedge, Hydraulic or Mechanical)
Screening Buckets
Grapples - Log, Demo, Clam-Shell, Orange Peel
Frost RippersGRITT Equipment Sales
-
3
2016 Cat 320EL with Hydraulic Thumb forestry cage for front window , also plumbed for a mulcher Hours 7760 undercarriage around 70 percent Air condition cab back up camera call Steve anytime 506 461 3657 SD EQUIPMENT LTD EXCAVATOR IS IN FREDERICTON NB ((FINANCE AVAILABLE DELIVERY AVAILABLE ))
-
4
New hydraulic pump
Requires an engine
-
5
THESE ARE TWO OKADA 2020 BUT NOW CONSIDERED 2023 HAMMERS BOTH TOTALLY REBUILT WITH STAGE 2 REBUILD KITS WHICH INCLUDED ALL NEW BUSHINGS - NEW SEAL KIT - NEW PISTONS AND TWO NEW MOIL POINTS RESEALED AT OKADA FACTORY REPAIR SHOP - BOTH WERE LITTLE USED - RESEALING DUE TO SITTING DUE TO COVID - BUT DECIDED TO MAKE THEM BOTH AS NEW c/w 6 MONTHS FULL WARRANTY FROM OKADA NORTH AMERICA STARTING THE DAY YOU RECEIVE THE HAMMER.
2020 Okada ORV7500 Hydraulic Demo Hammer Breaker Chisel Attachment Tool
LOW HOUR 2020 MODEL 7500 FT LB HAMMER USED 1 JOB BEFORE COVID - CURRENTLY FINISHED A COMPLETE REBUILT TO NEW AT OKADA'S OREGAN FACTORY REBUILD FACILITY
HAVING A COMPLETE RESEAL AND NEW NITROGEN CHARGE ALONG WITH NEW FACTORY PISTON AND ALL NEW BUSHINGS AND SEAL KIT COMES WITH 1 NEW OKDA MOIL POINT AND 1 AS NEW OKADA MOIL POINT SO 2 NEW POINTS
WILL BE SHIPPED DIRECTLY FROM OUR LANGLEY BC YARD THERE TO BUYERS YARD - WILL SHIP ON OUR ACCOUNT WE GET FAST SERVICE AND GREAT RATES
TAKE OKADA ORV7500 — MID CLASS HYDRAULIC BREAKER READY TO WORK FOR $60,000.00 CDN
SEE IMAGE 4 FOR A USED ONE FOR SALE THAT IS 2 SERIAL NUMBERS OFF OF OUR FACTORY REBUILT - RESEALED UNIT
AND TAKE THE OKADA TOP150 — 3000 FT-LBS CLASS HYDRAULIC BREAKER FOR $30,000.00
FRANK 604-476-7777
OKADA ORV7500 — MID CLASS HYDRAULIC BREAKER
ORV Series hydraulic breakers for use with skid steer loaders, mini and small excavators and tractor loader backhoes.
AUTO-LUBE
A central grease port with internal grease passage allows you to easily adapt the hammer to most auto lube systems.
MAIN VALVE
The internal control valve system equates to faster speeds and higher impact energy while still allowing the breaker to operate at cooler temperatures.
ACCUMULATOR
The large capacity accumulator reduces shock load in the system.
STROKE ADJUSTER
Variable speed control in the breaker maximizes productivity.
ORIGINAL HOLDING SYSTEM
The powercell is securely held inside the bracket with the head damper, reducing recoil.
LARGER N2 GAS CHAMBER
Ensures high impact power.
LONG STROKE PISTON
Increases impact power and reduces vibration and recoil.
DUAL CHISEL RETAINING PIN
Heavy-duty chisel set pins in many Okada models offer extended service life.
DURABLE BREAKER BRACKET
Includes a heavy-duty bottom plate that protects the powercell and reduces noise and vibration.
Technical Data
IMPACT ENERGY CLASS 7500 ft-lb / 10170 JOULES
OPERATING WEIGHT 5950 lbs / 2698 kg
OIL FLOW 63-72 gpm / 238-272 lpm
FREQUENCY 230-400 bpm L-mode / 270-470 S-mode
OPERATING PRESSURE 2320-2600 psi / 157-180 bar
MECHANICAL ENERGY 98-133 HP / 73.4-99.5 KW
MECHANICAL ENERGY AVG 115.5 HP / 86 KW
UNIT WORKING LENGTH 124 in / 315 cm
TOOL DIAMETER 6.1 in / 155 mm
TOOL WORKING LENGTH 30.2 IN / 767 MM
85DB(A) LEVEL DISTANCE 119-167 ft / 36-51 M
CARRIER WEIGHT RANGE 60-92 lbs. / 27-42 M tonOKADA TOP150 — 3000 FT-LBS CLASS HYDRAULIC BREAKER
Okada’s medium class breakers are available in a wide range of designs, from those specifically engineered to provide maximum impact energy for the toughest rock applications to others suited for a combination of concrete and rock breaking with the potential for faster blow speeds.
Precision machining processes and strict Okada quality control are used to produce all main breaker components. There is no need for complete assembly replacements and the use of high precision parts mean economical, labor-saving rebuilds of your Okada breaker.
Breaker brackets are made of heavy gauge high tensile steel plates and are designed to give maximum protection to the breaker body and dissipate heat while making it easier to access the equipment during daily maintenance inspection.
Okada bushing designs, a special heat treatment process and individually lubricated bushings enhance the service life of wear parts.
Technical Data:
IMPACT ENERGY CLASS 3000 ft-lb / 4068 JOULES
OPERATING WEIGHT 3000 lbs / 1361 kg
OIL FLOW 30-35 gpm / 114-132 lpm
FREQUENCY 600-750 bpm L-mode
OPERATING PRESSURE 2030-2620 psi / 140-180 bar
MECHANICAL ENERGY 42-63 hp / 31-47 kw
MECHANICAL ENERGY AVG 52.5 hp / 39 kw
UNIT WORKING LENGTH 94 in / 239 cm
TOOL DIAMETER 4.8 in / 122 mm
TOOL WORKING LENGTH 24 in / 610 mm
CARRIER WEIGHT RANGE 28-42 lbs. / 13-19 M tonWE ALSO HAVE A $80k NEW OLD STOCK OKADA DEMOLTION PROCESSOR THAT FOR 200-350 CLASS MACHINES - SEE MY OTHER ADS FOR $35,000.00
-
6
FITS 250-500 CLASS EXCAVATORS - $92k REPLACMENT COST
BRAND NEW EXTREME DUTY EXCAVATOR MOUNTED LOGGING 20K CAPACITY GRAPPLE C/W WITH NEW CUSTOM EXTREME DUTY $7500.00 BOLT ON TOP PLATE SYSTEM - THIS IS NOT A WELD ON SYSTEM BUT CUSTOM ONE WAY THREADED BOLT ON SO YOU CAN CHANGE EAR SETS QUICKLY WITH ONLY A MILWAUKEE ELECTRIC IMPACT REQUIRED ON ONE WAY EASY ACCESS BOLTS
TAKE THIS 85,000.00 PLUS COST OF TOP PLATE SYSTEM GRAPPLE FOR $45K JUST LOWERED THE PRICES TO MOVE THIS EQUIPMENT QUICKLY - FRANK 604-476-7777 OR TOLL FREE Phone : 1-(833) 693-9323 ONLY SELLING AS LEAVING BC TO MOVE TO OUR NEW HOME IN NB AFTER 53 YEARS IN DEMOLITION - TRUCKING
MODEL T40HPX-114 2 CUBIC YARD 360 DEGREE ROTATION GRAPPLE 19000 LB CAPACITY - BRAND NEW DEMOLITION OR LOGGING GRAPPLE WITH HPX DRIVE NO HYDRAULIC CYLINDER GRAPPLE
CURRENTLY AT DC WELDING WHO IS INSTALLLED A BRAND NEW BOLT ON TOP PLATE WITH 90MM PINS WITH 12.80 INCHES BETWEEN THE EARS TO PUT ON A PC360LC-10 WITH GEITH PIN GRABBER COUPLER - THAT EXCAVATOR IS NOW SOLD.
WE WERE ALSO GOING TO MOUNT ON OUR LONG REACH PC450LC-8 KOMATUD WITH PIN GRABBER MOUNT BY BUILDING ANOTHER 100 MM BOLT ON TOP PLATE
HAS CONSTANT HI-PRESSURE GRABBING FORCES AND DOES NOT RELEASE PRESSURE UNTIL DONE BY THE OPERATOR
THIS USES A HELIX STYLE DRIVE AND INTERNAL ROTATOR - IT HAS A QUICK CHANGE GRAPPLE SYSTEM TO CHANGE TO MULTIPLE CHOICES FOR DIFFERENT GRAPPLE ARMS FROM LOGGING - DEMOLITION - ETC
BASE GRAPPLE NEW IS OVER $85,000.00 PLUS OVERSEAS SHIPPING - CUSTOMS AND 16 WEEKS OF LEAD TIME
PERFECT FOR UNDERWATER WORK, LOGGING OR DEMOLITION AS NEVER EXPOSE HYDRAULIC CYLINDERS WHEN WORKING
TAKE THIS NEW GRAPPLE TODAY FOR $45,000.00 WITH THE NEW BOLT ON TOP PLATE IN PLACE
ONLY SELLING AS WE ARE RETIRING AND SELLING ALL MY EXCAVATORS AND ATTACHMENTS
JUST LOWERED THE PRICES TO MOVE THIS EQUIPMENT QUICKLY AS RETIRING BACK TO OUR NEW HOME IN NB DUE TO HEALTH ISSUES FROM THE FOREST FIRE SMOKE PARTICULATES AND EXTREME TRAFFIC AND ITS SMOG IN THE FRASER VALLEY AND CLEARING OUT MY YARD TOTALLY
WILL SHIP QUICKLY WE GET GREAT RATES AND SERVICE AND CAN HAVE A TRUCK UNDER IT NEXT BUSINESS DAY
FRANK 604-476-7777
THIS GRAPPLE WILL PIN ON THE FOLLOWING MACHINES DIRECTLY OR ANY PIN GRABBER THAT TAKES 90 MM PINS WITH 12.80 INCHES ACROSS THE BOTTOM MOUNT
Case CX240
Case CX240
Case CX290
Case CX290Komatsu PC240
Komatsu PC240
Komatsu PC250-6
Komatsu PC270
Komatsu PC270LC-6
Komatsu PC270LC-7
Komatsu PC280
Komatsu PC280
Komatsu PC290Link-Belt 240LX
Link-Belt 290LX
Link-Belt 3400 QUANTUM
Link-Belt 3900 QUANTUMALL PARTS AND QUICK CHANGE GRAPPLE SHELLS (ARMS) ARE AVAILABLE FROM:
KINSHOFER Canada
5040 Mainway Drive, Unit #11
Burlington, ON, L7L 7G5
Tel.: +1 (905) 335 2856
Fax: +1 (905) 335 4529
Toll Free (North America): 1 (800) 268 9525
Email: sales-northamerica@kinshofer.comKINSHOFER GmbH is a leading manufacturer of attachments for truck cranes and excavators for the most important industries worldwide.
From our headquarters in Holzkirchen, Bavaria, we offer our customers an extensive range of attachments for equipment carriers with or without hydraulics for scrap, demolition, track construction, landscaping, general construction, snow clearing, excavation, road construction, forestry, recycling, etc.
The continuing demand for transportation and infrastructure is constantly driving our product development and the service we offer. As a result, we are continuously expanding our product range in order to develop and produce technical highlights in the industries.
The cylinderless and low-maintenance technologies that are used for the HPXdrive on grapples or the NOX tiltrotators and TC tilt couplers are examples of these innovations, as are the products for special requirements or unusual uses from our special solutions department.
With high quality, variety and the latest technology, KINSHOFER crane and excavator attachments set standards worldwide.
Technologies - HPXdrive Excavator
Functional exchange, depending on demands!
During times of growing costs and environmental awareness, efficient working is getting more and more important.
The HPXdrive stands out thanks to its extended lifetime compared to a conventional cylinder-driven grab.Compared to conventional cylinder grabs, the closing force of the HPXdrive is high and constant during the entire operation.
The movement of the arms is generated by two hollow shafts, which run opposd and have a helix thread, hydraulically driven by a single piston.
The resulting closing force is always the same no matter the position of the shellsThanks to the shell exchange system you are able to clearly lower the investment costs for your fleet.
Just change fast and easy to the suitable shell option depending on the task.
The reliable shell exchange system features an easy loosening of the shells in case of exchange and a safe and steady holding of loads during every task.
Setup times can be reduced to a minimum.
The flexibility of your work processes as well as your competitive abilities can be increased.
-
7
HINO 185
Good cab, motor and transmission
Hiab crane
Runs good
Requires brakes (rusty and sticky)
Idea for farm, automatic and crane would be very useful
Crane can be sold separate
-
8
For sale a new Rockwell automatic slack adjuster part # R80 1073 asking $100.00 phone 902 860 1224
-
9
Tire machine 1-800-361-4095 ** ** Tire machine MONDIAL TC-325 HelpvSwing arm Tire changer with Bead Blaster It allows to remove and install regular low profile/runflat tires up to 24 "in diameter thanks to the pneumatic Help arm. Plastic inserts are provided to protect the alloy wheels.
TC-325 Specifications
Rim clamping outside 10"-22"
Rim clamping inside 12"-24"
Motor: 2HP, 15 AMPS, 120V/60Hz
Maximum Tire Diameter 41"
Wheel width:3’’-15"
Operating pressure 115-145 psi
- One year warranty on parts. We have all spare parts in stock.
-Transport service and delivery available across Canada, can be picked up at the local terminal delivery fees applies.Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
10
-PISTON RING SET, HASTINGS #2C7859 (STD), CONTINENTAL TRACTORS N-Y-F SERIES. $50.00/set.
-ROD BEARING SET, TRW #CB726P/3764CP, FOR BUDA 4CD C645-6DC844, 6MO SERIES. $40.00/set.
-(4 only) ENGINE VALVES, MCQUAY NORRIS #V1139, 4-CYL CASE, CO-OP, WAUKESHAW FC-FK-6Z-KA, 1935-41. $20.00/4.
-(2 only) VALVE GUIDES, MCQUAY NORRIS #G497, FOR ALLIS CHALMERS 1956-59, D17-WD45D, BUDA. $5.00/2.
Check part numbers for all applications.
PICK UP IN HAMMONDS PLAINS. Shipping available by Canada Post at cost.
-
11
New chain and bearings, u-joints.Fits any 3 point hitch.Has hydrualic arm to change direction. Newglasgow area
-
12
Grapple and rotator that came off a 230 timberjack works perfect just upgraded. 600 obo call or text 902 870 5273 for more information.
-
13
3 farrow plow massey i think . works great. has a dept wheel to ensure you dont go too deep, heavy duty and will need 40 hp or better to run this old girl.
-
14
Brand new never used, Briggs and Stratton engine , very easy to maintain.
-
15
Boss Salt Spreader TGS 600 - excellent condition. Please call for details.
-
16
Looking for steering box for 135 massy us style that has the power steering piston on the steering box
-
17
Mondial GP-6 is the Perfect lifting solution for DIY enthusiasts and hobbyists who enjoy taking care of cars in their home garage thanks to its mobile design and low ceiling application , the GP-6 offers greater versatility and ease of maintenance compared to traditional lifting systems. The portable design of allows for convenient mobility that you can't find with other car lifts on the market. The GP-6 is the low ceiling solution, it can be installed in any garage with ceilings less than eight feet high. MONDIAL A GP-6 specifications:
Lifting Capacity 6,000 lb
Power Unit 110V
Height of columns: 64.25"
Height with fully extended cylinder: 89.25"
Adjustable Width 120"-105""
Min Height 4.5"
Max Height 45"
2 locking positions
Quick connect hydraulic hoses
1 year parts warranty & 5 years on the structure
We have all spare parts in STOCK
For more information contact us Tel:1-800-361-4095
Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
18
Horst, 4000 series underbelly mount
-
19
Good used ecm off a 99 international 466e
Let me know any questions
Thanks
-
20
6 - - - 7in New metal cutting disks. 1/16 , 3/32 , & 1/8in thickness. Some for hand grinder and some for skill saw. $ 20.00 for all.
-
21
They are in stock and we ship Canada wide, 1-800-361-4095 Grand Prix Import has been selling Quality Automotive Equipment since 1977 in the Canadian market .**Looking to upgrade your garage, increase your parking space and get work done on your car? The SUMMER SALE is on now.
We're excited to offer you our MP10SW double parking 4 post lifts with 10,000 lbs of lifting capacity - perfect for any garage.
Specs:
- 207.5" Wide - 188.6" Long - 77 space under the parking deck - 110V
5000 lb sliding Scissor Jack, capable of an additional 19 INCHES of lift and a set of ALUMINUM RAMPS available as an option
Our 4 post lifts come with the following:
- 110V power unir - Standard Diamond Plate steel with ramps, or optional Premium aluminum approach ramps - Completely enclosed carriages for safety, 3/16 non-skid diamond plate - Easy-operation lock handle located by power unit, minimizing any bending or squatting - Caster wheels, six steel drip trays, jack plate and mounting hardware included - 1 Year warranty on all parts; 5 Year on structure
National Shipping Available Can be picked up at the local terminal. Delivery fee's apply please contact us
For more information contact us Tel:1-800-361-4095
-
22
2008 Stoughton 53" Dry Van
Brakes recently done.
All maintenance up to date.
75% rubber on all tires.
Inspected until October 2024.$10,000
Located in Berwick
If interested call Garnet at 1-902-680-2024
-
23
75hp, 69 pto, no DEF, just serviced, 1011hrs, 4x4, 12x12 shuttle shift, 655tl loader, cab with heat and ac, am/fm radio, buddy seat, air ride driver seat, exterior three point hitch control, sunroof, visor, two sets rear remotes, loaded rear tires, tilt steering. 49900 obo
-
24
For Sale: Various 11 R 22.5 Drive Tires and Various 255 / 70 R 22.5 Trailer Tires - ranging from $100 - $150 each.
Located in the Kentville area. PHONE: 902-678-5685
-
25
ire machine 1-800-361-4095 Tire machine MONDIAL TC-325 Help& Balancer WB-255
Swing arm Tire changer with Bead Blaster It allows to remove and install regular low profile/runflat tires up to 24 "in diameter thanks to the pneumatic Help arm. Plastic inserts are provided to protect the alloy wheels.WB-255 wheel balancer can support rim size from 10" to 24", tire size up to 34", perfect for home use or business.
Rim diameter: 10"-24"
Max tire diameter: 1000mm
Tire width: 15"-16"
Balance precision: 1g
Motor: 110V- One year warranty on parts. We have all spare parts in stock.
-Transport service and delivery available across Canada, can be picked up at the local terminal delivery fees applies.Address
GPI
8275 17th Avenue
MONTREAL, QC
H1Z4J9
-
26
Great truck. Not needed. In frame on engine it has about 75,000 miles on rebuild.
18 speed 355
24.5 rubber, has set of 4 full fenders in rear. Bunk heater , Texas bumper, lots of lights. Truck is just not needed. I put it on the road in early spring doing word for 2-4 weeks. It’s solid.
-
27
130 legend 4x4 with cab have loader for tractor if wanted not currently on great on fuel asking 27000 obo
-
28
Complete heavy duty plow coulters (2), no brakes, bends or welds fits Kverneland, Massey, John Deere and others. Hubs are tight.
400 ea.
Please call
-
29
All original removed for 1964 Case IH B414 motor
-
30
3 SAFETY TRIANGLES & CARRY CASE. Purchase & pick up n Truro.
-
31
2009 53ft step deck with hydraulic tail ,lower deck is 42 ft great for containers ,equipment ,vehicles and much more can easily add a hydraulic winch .
Never used in the winter.
-
32
New control box, never opened; bought for B414 but will fit many other models, list is on the second photo
-
33
64” skid steer snowblower don’t use just setting around so time for new home
-
34
Cat 3126. Runs but rough. 4 new injectors. Parts engine. 500.00. No emails. Text or phone 902-664-8812.
-
35
Used one season, great unit amazing lift capacity for the size.
Includes a 56 inch log grapple and a second set of smaller tires.
A stump grinder attachment can be included as well for an additional price.
-
36
2020 Kioti CK 2610hst TLB, 427hrs, 4x4 with diff lock and loaded Ag tires, front loader with 66" bucket, backhoe with 12" digging bucket, 36" clean up bucket, manual thumb and big foot stabilizer pads, 3rd function plumbed to front for grapple, 25hp diesel with no emissions. Very capable machine and run all day on a tank of fuel. Easily out works the other orange brand. Upgraded to skid steer and excavator. Delivery possible. $32 500 OBO. NO TRADES
-
37
2015 Freightliner Cascadia
DD15
10 speed
1 million KM
Excellent Condition
Please Contact Donny Gallant for more information: 902 452-2191
-
38
I am looking for a mini excavator also open to a larger one as well can pay cash 902-237-9911 thanks
-
39
Selling my cat track skid steer comes with brand new set of extra tracks. Works perfect
-
40
8 ft fisher snow plow,came off 1994 chev,comes with everything to install pump, controls,levers brackets.
-
41
Qty 2 - 18.4-34 23 degrees
These tires are in very good condition
Located in Moncton
-
42
Used once on my foodplots. Selling tractor so no longer need it. Pic is off the EA website, second pic is the unit for sale which is currently located on my other property. Black not yellow. Very well built in North America, not imported junk. Asking 4k firm. No exchange rate, duty, or taxes to deal with. Will deliver. No trades.
https://www.everythingattachments.com/Fully-adjustable-Deluxe-Box-Frame-Disc-Harrow-p/eta-xd-bf-dh.htm
-
43
John Deere 160 with 8000 hours. Undercarriage completely redone has 300 hours on it.
-
44
Small tractor chains, size 12.4x16 studded. Brought in 2019, used one year still like new. These are Trygg chains, not the cheap offshore chains. Paid $800.
-
45
Swing motor and pinion gear came out of a 2003 Cat 312 excavator $500 (902-237-9911)
-
46
New buckets, rakes, stump rippers, frost rippers lifting lugs.
Skid steer, farm tractors we have you covered.
This is the time of year for bucket repairs or complete refurbishment.
Swap out ears to fit a different machine.
902 880 4033 feel free to call or text.
Send a message for a quote on any of your projects.
-
47
1954 Ferguson tea 20 tractor great condition new carb alternator starter. fluids changed $ 3000 9024999760
-
48
18 load bars $25.00 each, 50 e straps $10.00 each and 2 load bars 3 in. square $50.00 each ( Make an offer on all of them) Phone Calls Only 902-757-2285
-
49
Cat 950F great machine
-
50
Kubota 7060 third funtion front fenders 350hrs