Buy and sell, Tools with in Canada, Ontario, Toronto, Oakville / Halton Region.
-
1
Summer Sale until Aug 31, 2023
Call us with any questions 250-613-7523
PTA-500 Product Specifications:
- Power supply voltage AC 110/220V Auto detection
- Power supply capacity 7.3 kVA
- Rated input current (TIG) 16.7 A
- Rated input current (MMA) 23 A
- Rated input current (CUT) 27 A
- Output current range (TIG) 10 - 200 A DC
- Output current range (MMA) 10 - 200 A
- Output current range (CUT) 10 - 50 A
- No-load voltage (TIG) 56 V
- No-load voltage (MMA) 56 V
- No-load voltage (CUT) 220 V
- Dia. of welding rod(MMA) Max 5/32
- Arc initiation way (TIG) HF
- Arc initiation way (MMA) Touch
- Arc initiation way (CUT) HF
- Protection grade provided by enclosure IP 21
- No-load loss 50 W
- Power factor 0.93
- Insulation class F
- Duty cycle 70%
- Efficiency 85%
- Air pressure (CUT) 40-60 psi @ 4 CFM
- Gas flow (TIG) 2-5 L/min
- Gas flow (CUT) 100 L/min
- Cutting thickness (CUT) 3/4 inch @ 2.5 inches per Minute
- Weight 12 kg
- Dimension (mm) 420*210*300
What's In The Box?
- 1 piece x Ground Clamp
- 1 piece x Stick Holder
- 1 piece x Panasonic P80 torch 12ft
- 1 piece x Tig torch 12ft
- 3 sets consumables
- Regulator & water separator w/ pressor gauge
Shipping is a flat rate of $50 anywhere in Canada
All our units come with a unbeatable 3 year warranty.
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept PayPal, Visa MC AMEX and Etransfers give us a call 250.613.7523
We are fully accredited with the BBB (Better Business bureau) https://www.bbb.org/
We hold a A+ rating
WE WILL NOT ACCEPT CHEQUES
-
2
Makita MAK-DJV180Z 18V Li-Ion Jig Saw and
Makita MAK-DSS611Z 6-1/2" Circular Saw 18V Li-Ion
Never used
$100 each
$175 for both. Save $100 off retail
No Battery
-
3
Bought wrong ones for miter tablet new rigid never used. $60 not sold in stores online only. From homedepot lowes tools saw work bench Makita Dewalt compound miter saw
-
4
King Canada 16 GA x 2 in. N Type Medium Crown Stapler Kit - $125
Mastercraft Air Powered Clipped Head Framing Nailer 2-3 1/2 in. 34 Degree $150
-
5
8pc screw extractor set from 1/8 inch to 1-3/8
-
6
Craftsman 3/8 drill available . Good condition.
-
7
gws8-45 unused
-
8
$1/ package of 2
Box of 5 packages $4
-
9
Vintage Midsaw Bandsaw 22"
Made in England
4 speeds
3 Phase/ 440V
Base is roughly 30"x 30"Make an offer. Will load the saw up with forklift.
Will trade for an old motorcycle or boat.
-
10
15 inch adjustable wrench almost new
-
11
Finally, getting to all those unfinished projects in the Garage or Workshop?
Wife on your case to get them done with no excuses because we are locked down?
Don't work in sub-par light. Upgrade your garage lighting and see the difference for yourself.
LEVKOM Lighting provides the high-quality Garage and Shop lighting options at a fraction of the price of electrical wholesalers.
Check us out at https://bit.ly/levkomlighting
If you spend any time in your garage, workshop, attic or any other workspace you know the value of good lighting. Unfortunately, most high-output lighting costs a boatload to run and has a very short lifespan.
Our high-output LED lighting options are the answer.
** Up to 800% Brighter than traditional options
** No Warm-up time required
** Rated for 50,000 hours
** Use 70% less energy than your existing lights
Upgrade your lighting today and save 10% on your first order.
Click the "Visit Website" button to see more Or call us at 1-800-801-2585
-
12
its SAE and is 3/8 inch tool set
-
13
Ask about our free parking lot stencils included with purchase of line painting machines! Plus, get additional discounts on Traffic Paint.
The LineLazer 3400 is the professional choice for dependable, 1-gun striping for small parking lots, mini malls, seal coating contractors, schools and park and recreation departments.
- Updated Frame
- Improved Tracking & Line Quality
- Added stability with newly designed, 3-inch longer frame
- Accepts 15-gallon hopper and EZ Bead System
- Rear Mount Hose Wrap
- Easier Stencil Jobs
- Easy on/off functionality
- Easy-To-Reach Controls
- Fine-tune the striper without stopping
- Operator controls are located on the handlebars
- New Handlebar Design
- Reduced Vibration
- Less operator fatigue with greater comfort and control
- Electronic Pressure Control
- Improved Line Quality
- Accurate, tight tolerance system
- Endurance Chromex Pump
- Reliable, Long-Life Pump
- Industry-best pump performance — field-proven design
- Handle the most demanding materials with long-life rod treatment
- 4X harder than ordinary chrome
- Honda GX Engine
- Reliable, Easy-to-Start Power
- Contractor-preferred — excellent power and proven reliability
- Oil Alert shuts down engine to prevent damage if oil level drops too low
- Easy Out Pump Filter
- Easy Pump Maintenance & Less Clogging
- Inside-out design means less mess with fewer tip clogs
- Front Swivel Wheel
- Easier Maneuverability
- Ability to stripe right up to the curb
- Makes easy work of hard-to-do curves
- Years of dependable operation with tapered locking pin design
Call or email for quote requests 587-882-7623
Roadly will match or beat any advertised pricing on line painting machines. We carry a full range of line stripers, traffic paint, Graco line striper accessories, Titan line painting products, crack filling equipment, rubber curbs, Flexpost, and many more parking lot maintenance products.
- Updated Frame
-
14
575vac/3ph/60Hz. Makes 44 scfm @ 100 psig. MAWP 150 psig. Come with heavy duty starter. Unit runs beautifully. Baldor drive motor.
-
15
A Used Condition, Snap-On Top and Bottom Toolbox with Tools. Snap-On KRA4810FPBO Top Chest And Snap-On KRA4813D Bottom Chest. Including lots of tools from hammers, screwdrivers, Sockets, ratchets. Air tools, specialty tools, pry bars, Wrenches both Metric and SAE And tons of other mechanic Tools. Pickup in Brampton at Sandalwood And Van Kirk, Pickup Only, No Delivery. No Lowball Offers Please. Asking $4500 Will provide further information and pictures if needed. Willing to sell Tools separately. Tools Are Not Snap-On all different Brands/Models.
-
16
Air sander, works well maybe just clean leather pad. No issues
25$
Pickup in acton
-
17
sealed and new
$70 OBO
Pick up Mississauga
3.0 Milwaukee battery
-
18
Cake decorating toll box carrier
-
19
Brand new Veto pro pack LC toolbag. Posted in tools, tool storage, benches in Oakville / Halton Region. January 14, 2023
-
20
MASTERCRAFT 200+-piece socket set combines most popular sockets,
Wrenches and hex keys for easy accessibility
Most items in kit brand new
Great value for this price
Plastic case usedCross-Posted
-
21
330ft, only need 150ft
-
22
Frame/Bow Saw with Japanese Nobex Blade. The entire frame is beautifully sanded, oiled, and polished; and tension through a stainless steel rod and thumbscrew. The curved wood and handles are made from exceptional quality hardwood. Nobex blade is 24 3/4 inches x 1 5/8 inches. Frame is 29 1/2 inches wide x 20 inches high and 7/8” thick. In excellent, like new condition. Used once or never used.
Asking $145.00
Call 905-703-6959, Georgetown
-
23
Left over from job
-
24
3 casters wheels
Brand new
Heavy Duty 440 lb
-
25
Looking to sell all of them together.
400 obo
-
26
Brand New Master Craft Air tool combo c/w hard case, NEVER Used, Mini Palm-Grip Nailer, Stapler 18 GA, Pin Nailer 23 GA, and Brad Nailer 18GA
GREAT CHRISTMAS GIFT!!
-
27
Very good low profile jack.
worked great for my sedan but for my Savana vans is not suitable.
https://www.amazon.ca/Powerbuilt-620479E-Profile-Floor-Safety/dp/B00OCIBPIM
-
28
I have an extra Ridgid 18v Sub Compact impact driver that I don't need.
It has barely been used and still have the box and accessories. Link to item on Home Depot's website below.Located in Erin, north of Brampton at N0B 1Z0. If the ad is up, it is available.
Link to exact product here: https://www.homedepot.ca/product/ridgid-18v-brushless-cordless-sub-compact-1-4-inch-impact-driver-tool-only-/1001601561
-
29
Works great! Like new
-
30
Pull mudd straight from the bucket and pump it on the flat joints and corners, even use as a nail/ screw spotter! Makes light work of jobs! I used it once and realized real fast I need the another system, only because I do whole houses at a time. This is great for kitchens, bathrooms single room applications. I paid close to 500 after taxes