Buy and sell, Tools with in Canada, Ontario, Toronto.
-
1
B&D 13" Electric Corded Trimmer, Blades Sharpened, Canadian
-
2
Total Blade cutting set for sale. Cuts almost anything in any direction. Cuts ceramic, steel, wood, glads, marble and more. Never used.
The set contains glade frame, two blades, two clamps and leveling device.
Brand new condition.
Price $30
Pickup in Ajax at 401 and Westney Road.
Phone: 416-887-7539
-
3
The handle shows the decimal equivalents for 8ths, 16ths , and 64ths of an inch engraved on it and there is also a case and how-to-use manual included. Used for many years by a professional millwright as the case would suggest.
-
4
It's pretty much brand new I've only done about 10 cuts of quarter round I got it on sale after tax it was $360 I'm firm at $280
-
5
Stainless Steel, brand new, 1000psi,
6 gals/ minute.
Many new and used tips and stainless steel wands available.
Were previously used on a high pressure sprayer for heavy duty cleaning.
-
6
FINANCE AVAILABLE : Brand new 2023 CAEL Tractor/Tractor and Loader/ Tractor, Loader and Backhoe with 25 HP Perkins engine, heat and roof included, EPA certified at the lowest price in the market all over canada and usa
100%customers satisfaction
https://www.capitalautoequipment.com
****Tractor Parameters *****
*Drive Type : 4WD
*Overall Dimensions L×W×H(mm): 3180×1285/1450×2290
*Wheel Track (mm) :- Front : 970/1210
- Rear : 1000/1160*Wheel Bass(mm) : 1540
*Ground Clearance (mm) : 300
*Rated Traction Force(N): 6620
*Construction Mass(kg) : 1080
*Min.Turning Radius(m) : 3.27
*Theoretical Speed (km/h) :
-Forward(low-grade) : 0~8.2-Reverse(low-grade) : 0~8.2
- Forward(high grade) : 0~20- Reverse(high grade) : 0~20
***Engine Specifications***
Model : Perkins 403F-11
Type : 3-Cylinder Vertical, water cooled,4 stroke cycle indirect injection,
Rated Power(kw/hp) : 18.4/25Rated Speed (rpm) : 2600
Bore×Stroke (mm) : 77 X 81
Total Displacement(L) : 1.131
**** Drive System****
Clutch : Monolithic dry combined with friction
Gear Box : HST+Two gears
Main Drive : A pair of spiral bevel gears
Differential : Two closed planetary wheel
Differential Lock : Tooth type
****Traveling Mechanism****
*Tyre :
- Front : 26×7.5-12 grass tire
- Rear : 11.2-20 grass tire
* Steering Gear : Full Hydraulic Steering
* Brake : Double pedal disc brakes
*** Working Device ***
* Hydraulic System :
- Lifting Capacity at 610mm Behind Lift : 3900
- Point (N) 3-Point Suspension : Category :I
* P.T.O Shaft (Rear) :
- Rotating Speed (rpm) : 540/1000
- Spline Size : 6-Φ35 Rectangular Spline
* P.T.O Shaft (Mid):
- Rotating Speed (rpm): 2000
- Spline Size : 11 teeth involute spline
1 Year Warranty on all partsPRICES :
-TRACTOR : $17650
-LOADER TRACTOR : $20499
-BACKHOE TRACTOR : $20499
-LOADER TRACTOR BACKHOE : 24499
**Optional Features**
- CLOSED GLASS CAB : EXTRA $3000
-AC $1500
ATTACHMENTS AVAILABLE:
Cultivator
Disc harrow
Mower
CONTACT ONTARIO BRANCH (365) 888-3765/ (365)317-7933
CONTACT BRITISH COLUMBIA BRANCH (604)-314-9755
We are located Hamilton, ON and Surrey, BC
We ship throughout Canada
KEYWORDS: Yanmar, Volvo, used, Takeuchi, Mini, Kubota, Komatsu, Kobelco, JohnDeere, IHI, Hitachi, excavator, dozer, construction, Caterpillar, Case, Bobcat.Hyundai, Doosan, excavators, mini excavator, mini x, mini ex, Cat, Sany, Tractor,Compact, Midi, zero tail, Terex, Wacker Neuson, JCB, track loader, skid steer,trackloader, skidsteer, LonKing, Zoom Lion, Liugong, Sumitomo, Atlas Copco,Liebherr, Mitsubishi, Samsun, Toro, Mahindra, Massey Ferguson, New Holand,Lowboy, Low Boy , Cat,
-
7
Weller 8200 Soldering Gun and Case
100/140 watts
-
8
Rare Henry 5 Bench Vice
-
9
On Sale @1299.99
reg price $1499.99
Manufactured in Prince George B.C. Canada
PTA-500 Product Specifications:
- Power supply voltage AC 110/220V Auto detection
- Power supply capacity 7.3 kVA
- Rated input current (TIG) 16.7 A
- Rated input current (MMA) 23 A
- Rated input current (CUT) 27 A
- Output current range (TIG) 10 - 200 A DC
- Output current range (MMA) 10 - 200 A
- Output current range (CUT) 10 - 50 A
- No-load voltage (TIG) 56 V
- No-load voltage (MMA) 56 V
- No-load voltage (CUT) 220 V
- Dia. of welding rodΦ(MMA) Max 5/32
- Arc initiation way (TIG) HF
- Arc initiation way (MMA) Touch
- Arc initiation way (CUT) HF
- Protection grade provided by enclosure IP 21
- No-load loss 50 W
- Power factor 0.93
- Insulation class F
- Duty cycle 70%
- Efficiency 85%
- Air pressure (CUT) 40-60 psi @ 4 CFM
- Gas flow (TIG) 2-5 L/min
- Gas flow (CUT) 100 L/min
- Cutting thickness (CUT) 3/4 inch @ 2.5 inches per Minute
- Weight 12 kg
- Dimension (mm) 420*210*300
What's In The Box?
- 1 piece x Ground Clamp
- 1 piece x Stick Holder
- 1 piece x Panasonic P80 torch 12ft
- 1 piece x Tig torch 12ft
- 3 sets consumables
- Regulator & water separator w/ pressor gauge
RJR Equipment Innovations LTD in a Canadian company designing quality welders and plasma cutters for the past 12 year. located in Prince George B.C
All our units come with a unbeatable 2 year replacement warranty. If you have any problems send it back to us COD and we will ship you a new unit when a tracking number is provided.
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept Visa MC AMEX and Etransfers give us a call 250.613.7523
WE WILL NOT ACCEPT CHEQUES
-
10
Mailhot impact drill gun. Comes with 2 batteries and charger.
-
11
Steel Shelf Wall mounted shelf with 2 doors. 36" x 18" x 42"
Great condition
-
12
Approx. 20”x12”x12”
-
13
CALL 647 363 5872
READ FULL AD AS HAS 2 SYSTEMS
SYSTEM 1
LATEST GENERATION MASTER 7.5 HP SCREW AIR COMPRESSOR
INBUILT VARIABLE FREQUENCY PRE PROGAMMED DRIVE ( RARE IN 5.5 KW SYSTEMS )
32 CFM AIR DELIVERY AT 101 PSI
208 VAC TO 230 VAC SINGLE PHASE 60 HZ
WEIGHT 360 LBS
STAND ALONE REFRIGERATED AIR DRYER
CORRESPONDING AIR STORAGE TANK
COMPLETE TURNKEY SYSTEM
VERY SMART SYSTEM AND CONTROLLED BY VFD WILL GIVE AIR ON DEMAND AND ALSO SAVE ITS VALUE IN POWER BILLS WITHIN A FEW YEARS
WARRANTY 10 YEARS.
DELIVERY WITHIN CANADA AND USA AVAILABLE.
SYSTEM 2
LATEST GENERATION MASTER 10 HP ROTARY SCREW AIR COMPRESSOR
INBUILT VARIABLE FREQUENCY PRE PROGAMMED DRIVE
49 CFM AIR DELIVERY AT 101 PSI
208 VAC TO 230 VAC SINGLE PHASE 60 HZ (RARE IN SINGLE PHASE) 3 PHASE AVAILABLE
WEIGHT 500 LBS
STAND ALONE REFRIGERATED AIR DRYER
CORRESPONDING AIR STORAGE TANK
COMPLETE TURNKEY SYSTEM
VERY SMART SYSTEM AND CONTROLLED BY VFD WILL GIVE AIR ON DEMAND AND ALSO SAVE ITS VALUE IN POWER BILLS WITHIN A FEW YEARS
WARRANTY 10 YEARS
DELIVERY WITHIN CANADA AND USA AVAILABLE.
WE CAN SUPPLY SINGLE AND MULTI STAGE SCREW COMPRESSORS AND SPEACIALITY AIR SYSTEMS FOR HIGH END TECHNICAL APPLICATIONS LIKE FOOD AND HEALTH INDUSTRY.
ENGINEERS AND CONTRACTORS WELCOME TO DISCUSS AND HELP WITH SYSTEM DESIGN.
BUY FROM MANUFACTURERS DIRECT AND SAVE BIG ON COST
.
FINANCING AVAILABLE
CALL 647 363 5872
OTHER MODELS AVAILABLE
5 HP SCREW AIR COMPRESSOR
20 HP SCREW AIR COMPRESSOR
30 HP ROTARY SCREW AIR COMPRESSOR
50 HP SCREW COMPRESSOR
100 HP SCREW AIR COMPRESSOR
COMPRESSED AIR DRYERS
DESICCAN AIR DRYERS
AIR RECIEVER TANKS
PRECISION AIR FILTERS
___________________
WE DESIGN AND MANUFACTURE INDUSTRIAL ROTARY SCREW COMPRESSORS AND COMPLETE AIR SYSTEMS. EVERY SYSTEM COMES WITH OUR UNBEATABLE WARRANTY AND PRICE GUARANTEE.WE ALSO SELL COMPRSSED AIR DRYERS, REFRIGERATED AIR DRYERS, DESICCANT AIR DRYERS, DUAL TOWER REGENERATING AIR DRYERS, MODULAR AIR DRYERS, AIR RECIEVER TANKS AND PRECISION AIR FILTERS
-
14
for sale is a rodac 501 3/8 inch air ratchet
it does have lots of nicks on it. last time i tested it was like 5 years ago with a home air compressor. it worked but didn't seem very strong. maybe it needs repair or possibly my home air compressor did not provide adequate air for it to perform like it should.selling it AS IS
$25 BUCKS FIRM
-
15
Autel MaxiIM IM608 Automotive Key Programming Scan Tool with XP400 Key Programmer & APB112 Tool, All Systems Diagnostics & Service Functions, ECU Coding, Active Tests, Oil Reset, EPB, SAS, DPF, BMS
- ADVANCED KEY PROGRAMMING IMMO FUNCTIONS: Autel IM608 key programming tool can Read PIN, add new key, key learning, remote learning, generate keys, delete keys, all-key-lost to advanced IMMO ECU Reset/Adaptation/Refresh/Coding, IMMO Data Backup, read & write IMMO ECU & MCU & Transponder and etc. With XP400 key programmer and APB112, IM608 is a pro key programming tool pick for auto technicians and locksmith. NOTE: Please send VIN number to autelofficial@outlook.com to check compatibility.
- MOST USEFUL SERVICE/SPECIAL FUNCTIONS: IM608 is one of Autels most advanced automotive scan tools. It can perform most useful service functions like Oil Reset, EPB reset, SAS Reset, DPF Regeneration, Battery Registration, Injector Coding, Power Balance, Crankshaft Position Variation Learn & VGT Actuator Calibration. NOTE: Service/special functions are NOT universally compatible. Please send VIN number to autelofficial@outlook.com to check compatibility.
- ALL SYSTEMS DIAGNOSTICS: Autel IM608 diagnostic scanner can access and scan all available modules including ABS, SRS(Airbag), Engine(ECM), Transmission(PCM), HVAC, Suspension and etc to read and clear codes, view live data, view ECU information, perform bi-directional control/active tests, matching and adaptations and etc. With Auto Scan/Auto VIN feature, it shortens the overall diagnostic and service sessions.
- UNBEATABLE VEHICLE COVERAGE: Autel IM608 car key programming tool can work on over 80 American, European and Asian makes and models including 12V sedans, light trucks and SUVs. NOTE: IM608 does NOT work on all vehicles. Please send VIN number to autelofficial@outlook.com to check compatibility. NOTE: IM608 can not perform ECU programming.
- 1 YEAR WARRANTY 1 YEAR FREE UPDATES: Autel MaxiIM IM608 comes with 1(ONE) YEAR WARRANTY and 1 YEAR FREE software updates. And its backed by 30 Day REPLACEMENT or MONEY BACK policy. If any concerns or issues, please contact us directly via autelofficial@outlook.com to get a satisfactory solution.
___________________
Protec Equipment Canada was established since 2013 in Toronto,Canada as a warehouse distributor for vehicle diagnostic scan tools such as Launch, Autel & Fcar as well as our own brand “Protec” products for wheel line service & maintenance tools & equipment in the Automotive aftermarket. Now we expanded two distribution centres in North America. One located in Toronto,Ontatio,Canada,one located in Baltimore,Maryland,United States.Protec Equipment is dedicated to offer best quality diagnostic tools and garage equipment and provide one stop shop service solutions to Canadian automotive repair facilities.
-
16
Compressor Husky 20 gallon tank
•Electric Air Compressor 20 gal.- PA--------------650.00
•Hand Crank Air Hose Reel--------PA 8002145---59.99
•paid hose reel fittings 3 pc---------PA---------------15.00
•Rubber Hose 75ft.-------------------PA 8507717---39.99
•3/8” NTP Shut Off Ball Valve Kit PA 8477671---14.99
•3/8” NTP Shut Off Ball Valve Kit PA 8477671---14.99
•Filter Canister with Element-------PA 8477218---12.99
•12” wheel plastic----------------------PA---------------12.00
•12” wheel plastic----------------------PA---------------12.00
•Brass Fitting Forged Tee 3/8 in.--PA 0400176-----6.69
•Coupler Milton-------------------------PA 0430140---10.99
•Coupler Milton-------------------------PA 0430140---10.99
•Automatic Drain Valve---------------PA---------------15.00
•PVC Whip Air Hose (yellow)-------PA 8557639---14.99
•Air Filter---------------------------------PA 8185076---27.99
labor to install all the above---------priceless----00.00
•paid total -------------------------------------------------918.60
•paid tax-in-----------------------------------------------1038.01
•sell for-----------------------------------------------------650.00
you save---------------------------------------------------388.01
mfg.---------------------------------------------------------Husky
pump type-------------------------------------------------oil
pump type-------------------------------------------------cast iron
motor-------------------------------------------------------electric
power voltage--------------------------------------------120 Volts
instructions -----------------------------------------------yes
condition---------------------------------------------------excellent
warranty residential-------------------------------------NO
warranty commercial-----------------------------------NO
-------------------------------------------------------------------------------
EXTRA EQUIPMENT:
large wheels------------------------yes (see picture)
tank auto bleed system----------yes (see picture)
pump oil quick change valve---yes (see picture)
separator air water type---------yes (see picture)
hose manual reel------------------yes (see picture)
hose mfg. -------------------------- new
hose size---------------------------3/8
hose PSI----------------------------300 PSI
hose length------------------------75 ft.
handle/ hose reel quick release--yes
tool bucket holder bracket---------yes
WORKS WITH THE FOLLOWING TOOLS:
butterfly impact wrenches
impact wrenches
ratchets
spray guns
reciprocating saws
brad nailers
caulk guns
grease guns
chisels
engine cleaners
die grinders
drills
cut off saws
operate tools standard automotive--yes
operate tools home construction-----yes
inspection-------------before delivery payment
low-ballers---------------------------------no thanks--------------------------------------------------------
Motor Capacitor info :
NGM made in MEXICO
61B1D160189NNEM
189-227MFD 165VAC 60Hz
OP.T. MAX 65C
21/02/2006 07:40 LOT: 61079826 c22.2 No. 190 US
C103237300120
------------------------------------------------------------------------
-
17
SKIL SAW. It great working order, hardly used.
-
18
Never used
-
19
6x 12 cargo trailer converted into toy hauler camper.
Here are some of the things done!-Electrical outlets and hook up
-water hook up
-Flooring
-beds
- Counter and sink
- built in fire place
- cupboards for storage
- 4 corner jacks for levelling on un even ground
- roof top vent
-fan for ac.6000obo
-
20
Mastercraft Pneumatic Tool Kit
-
21
PRETTY MUCH NEW HILTI HDM500 with HIT-CR 500 CHEMICAL ANCHOR DISPENSER $120 o.b.o
-
22
its a tape measure, price is negotiable.
-
23
Most all in great condition....endmills including rougher lightly used....taps have some odd balls that are hard to find
-
24
on sale till jan 31
$1199.99
Regular price $1399.99
Manufactured in Prince George B.C. Canada
PC-34 Plasma Cutter Product Specifications:
Model: PC-34
- 60A Plasma Cutter (Air)
- DC INVERTER
- Uses Compressed Air needs 40-65 PSI @ 4CFM
- Dual Voltage 110 20amp/220V 30amp 50/60Hz Auto Detection
- Maximum Cut: 1 1/4" @ 4 inches per Minute
- ALL BRAND NEW Transistors/(IGBT)
- Duty Cycle 70% @ 60 Amp
- Power Factor: 0.93
- Efficiency: 85%
- Dimensions: 18.11 x 10.04 x 15.98"
- Pilot Arc
What's In The Box?
- 1 piece x Earth Clamp
- 1 piece x Panasonic P80 torch 12ft
- 2 sets cconsumables
- Regulator & water separator w/ pressure gauge
Ships in 1 day and takes 2-8 days to arrive within Canada
Check out our website for DEMO videos and specs
https://www.rjrequipmentinnovations.com/product/pc-34-plasma-cutter/All our units come with a unbeatable 2 year replacement warranty. If you have any problems send it back to us COD and we will ship you a new unit when a tracking number is provided.
RJR Equipment Innovations LTD in a Canadian company designing quality welders and plasma cutters for the past 12 year. Located in Prince George B.C
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept Visa, MC AMEX and Etransfers give us a call 250.613.7523
WE WILL NOT ACCEPT CHEQUES
-
25
On Sale @1299.99
reg price $1499.99
Manufactured in Prince George B.C. Canada
PTA-500 Product Specifications:
- Power supply voltage AC 110/220V Auto detection
- Power supply capacity 7.3 kVA
- Rated input current (TIG) 16.7 A
- Rated input current (MMA) 23 A
- Rated input current (CUT) 27 A
- Output current range (TIG) 10 - 200 A DC
- Output current range (MMA) 10 - 200 A
- Output current range (CUT) 10 - 50 A
- No-load voltage (TIG) 56 V
- No-load voltage (MMA) 56 V
- No-load voltage (CUT) 220 V
- Dia. of welding rodΦ(MMA) Max 5/32
- Arc initiation way (TIG) HF
- Arc initiation way (MMA) Touch
- Arc initiation way (CUT) HF
- Protection grade provided by enclosure IP 21
- No-load loss 50 W
- Power factor 0.93
- Insulation class F
- Duty cycle 70%
- Efficiency 85%
- Air pressure (CUT) 40-60 psi @ 4 CFM
- Gas flow (TIG) 2-5 L/min
- Gas flow (CUT) 100 L/min
- Cutting thickness (CUT) 3/4 inch @ 2.5 inches per Minute
- Weight 12 kg
- Dimension (mm) 420*210*300
What's In The Box?
- 1 piece x Ground Clamp
- 1 piece x Stick Holder
- 1 piece x Panasonic P80 torch 12ft
- 1 piece x Tig torch 12ft
- 3 sets consumables
- Regulator & water separator w/ pressor gauge
RJR Equipment Innovations LTD in a Canadian company designing quality welders and plasma cutters for the past 12 year. located in Prince George B.C
All our units come with a unbeatable 2 year replacement warranty. If you have any problems send it back to us COD and we will ship you a new unit when a tracking number is provided.
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept Visa MC AMEX and Etransfers give us a call 250.613.7523
WE WILL NOT ACCEPT CHEQUES
-
26
2 blacksmith hammers. 1 weeks use.
1x2.5lb
1x3lb
30 each
50 for both
-
27
Electric Engraver
Dremel 290. Older model
Very little use. Point is sharp
Very clean
5 speeds.
Works great!
$12. OBO
-
28
Most tools are snap-on and matco. Message me what u want and we can discuss the price.
-
29
Battery transfer cart, like new. For easily and safely removing/replacing batteries in order pickers, reach truck, walkie, stacker, pallet trucks, fork lifts... Crown, Raymond, Blue Giant...etc.
Transfer carts are used with roller equipped type stands to eliminate overhead lifting operations by allowing the user to roll batteries from one unit to another. Sackett battery carts pull the battery completely onto the cart. No extra handling is needed.
Single Battery Compartment
• 3000 lb. Capacity
• 2-3/8” Diameter Roller with Acid Resistant, Non-Conductive Coating and Sealed Bearings
• Flip-Up Battery Stop
• Non Conductive Back Stop
• 5” Composition Wheels
• Safe, One-Man Battery TransferText/Call Mike at 416 677 2067
-
30
JVC 600 volt to 208v and 120 v
transformer 15 KVA for $750.
-
31
Svecia semi-automatic, belt grinder to sharpen squeegees up to 53” long.
With manually slideable grinding head, and easily changeable abrasive belts.
Adjustable angle, micro-adjustable height.
220 or 380 V, 3Phase
$800 Text or call Mike 416 677 2067
www.machinerysupplies.ca
-
32
Use our Auto Quote system for Pricing & Details. Click “Instant Price” wherever you see it on our Brighton Woodworking Machinery website at www.brightonmachines.com
2006 Voorwood A 125F used Shape and Sand machine. See our website for more details. REF# BBM2395
Located in Ontario at our Brighton Woodworking Machinery Warehouse in Uxbridge, 20min E of 404 on Davis Drive.
-
33
Use our Auto Quote system for Pricing & Details. Click “Instant Price” wherever you see it on our Brighton Woodworking Machinery website at www.brightonmachines.com
2005 Voorwood A 125F used Shape and Sand machine. See our website for more details. REF# BBM2396
Located in Ontario at our Brighton Woodworking Machinery Warehouse in Uxbridge, 20min E of 404 on Davis Drive.
-
34
Please contact if interested.
Machine is no longer under power due to being replaced with a newer machine 8 months ago.
Machine was working when disconnected.
If interested can text videos of grinding videos.
-
35
Brand new Makita LXT Drill and Impact Driver combo comes with charger and 2x 3.0ah batteries
$300 O.B.O
-
36
- AC motor, 3450 rpm, 1 1/2 HP and 208/230/460 volt with a foot long shaft.
-Speed reducer and gearbox in various types available.
-AC motors: 575v, 460/230, 380v, 220v, 180 volt AC, 90v dc used and unused available please ask for the item you looking for in detail as such voltage, power / Watt and RPM/speed in first messege.
Replacement service is available.
-
37
4x4 feet $25 each
4x2 feet $15 each
Pickup near Kingston and Markham rd
-
38
FINANCING AVAILABLE - WWW.HOCANADA.COM - 1(844)440-4014
The STG13 Honda Stump Grinder features a new cutting system that provides a more efficient and precise cutting method. In addition, the new cutting system increases the longevity of the each individual tooth. The machine arrives with 4 rows of a total of 8 Tungsten Carbide teeth pre installed.
The newly designed teeth and cutting method can manage various soil conditions and contain 2 rotating independent edges. The teeth are made of tungsten carbide and replacing them is a breeze! This powerful machine will allow you to easily grind objects up to 10 inches above grade and 9 inches below grade.
Specs
General
Model No: STG13
Pre-Assembled: Majority
Engine brand: Powerful, high-specification Honda GX390 engine
Horsepower: 13.0 hp
Displacement: 389 cc
Net weight: 113 kg
Gross weight: 130 kg
RPM Operating: 3600 rpm
Type of Fuel: Gasoline
Start: Recoil
Oil Sensor: Yes
Wheel Tire 140/70-6
Brake: Drum brake
Belt: 2 pcs double V-belt
Blades: 8 pcs blades, Tungsten Carbide 4 x Right, 4 x Centre)
Frame Construction: Welded Steel
Transportation: Two lift handles on each side allow two people to lift the unit into a truck or SUV
Ergonomic handle: Adjusts to any height position to ensure operator comfort.
Product size: 69 x 29 x 47 inch
Packing size: 42 x 32 x 26 inch
Packing method: PlywoodCutting Wheel
Cutting wheel diameter: 9.45 inch
Cutting wheel thickness: 4.72 inch
Bearing: UCP205
Cutting Wheel RPM: 2200 rpm/min
Drive: Direct Belt Drive + Centrifugal Clutch + 17x1346Li V-beltCutting Capacity
Above grade: 10 Inch
Below grade: 9 Inch
Stump diameter: No LimitTeeth, Carbide Tips
Cutter type: Wood
Steel type: 42CrMo
Steel hardness: HRC40-42
Weight: 1.59 lbs
Length: 4-1/4 Inch
Width: 2-13/16 Inch
Tip Length: 1-1/2 InchThe Price Includes Free Shipping + 2 Year Warranty
House of Contractors Inc.
1(844)440-4014
www.hocanada.com
-
39
RPPL is a best and top notch mill part supplier that chooses well for your desires. They take enough solution and maintain by focusing with mill parts. However, it takes milled parts and focus on bearing needs. They considers turn mill parts Ontario for focusing on branded results.
https://rpplindustries.com/mill-parts/
-
40
We provide 24/7 purchasing options, New and Used 10ft, 20ft & 40ft shipping containers, transparent pricing & fast delivery. Our decommissioned shipping containers have reliably shipped goods across the ocean and now ready to help you with all your sustainable building, shipping and storage solutions. We proudly offer five universal shipping container sizes (10ft, 20ft & 40ft standard & 20ft High Cube & 40ft High Cube- all ISO certified).
To get started, just pick your size, provide your details Names, Delivery Address including postal code, Email and instantly, we will send you prices for all shipping containers. We are here to serve you. Contact for more details. Thank you.
-
41
1)Engine:188F diesel engine
2)Engine Power: 10hp
3)Transmission: blet transmission +Moulded Stell Gear-box
(differential lock:could this machine tyre rotates together in same direction or it can change the direction while turning the position)
4)Rotary tillage width:500-800mm
Rotary tillage depth:0-200mm
Diching width:180-400mm
Diching depth:0-300mm
Weeding width:700mm
5)Poductivity: 0.1(ha/h)
Fuel consumption:12.0-20.0kg/hm²
6)Gross weight:200kg
Net weight:250kg
7)Boundary dimension:1940*860*1050mm
Unit set pakage size:1300*800*1250mm
8)Support engine: 188F air cooling Diesel engine /180Water-cooled diesel engine
-
42
Master Cut 7 inch Portable Tile Saw
Motor turns on okay.
-
43
Used for one project
Works great - $185
Also tile cutter -$30
Take both for $200 and I will include a couple of diamond blades
-
44
Grinding discs
5 @ 7" x 1/4"
2 @ 7" x 1/8"
-
45
Good condition Floor nailer
Just $120
Why you rent
Text or Email
-
46
Master craft digital multimeter.
-
47
Finance Available: Brand new 2021 Mini excavator 0.8 ton with EPA certified at the lowest price in the market all over canada and usa 100% customers satisfaction
https://www.capitalautoequipment.com
Brand : CAEL
Total Weight: 820 KG
Engine : Briggs &Stratton
Digging Radius :2400mm
Digging Depth : 1400mm
Digging Height 2490 mm
Grade-ability : 45%
Grounding Clearance: 380mm
Total Length :2550mm
Total Width :930mm
Total height: 1500mm
Rated Power: 14.3 Hp
Travel Speed : 0-3.5KM/h
1 Year Warranty on all parts
Price $9999
CONTACT ONTARIO BRANCH (365) 888-3765/ (365)317-7933
CONTACT BRITISH COLUMBIA BRANCH (604)-314-9755
We are located surrey ,British Columbia
We ship throughout Canada
KEYWORDS: Yanmar, Volvo, used, Takeuchi, Mini, Kubota, Komatsu, Kobelco, John Deere, IHI, Hitachi, excavator, dozer, construction, Caterpillar, Case, Bobcat. Hyundai, Doosan, excavators, mini excavator, mini x, mini ex, Cat, Sany, Tractor, Compact, Midi, zero tail, Terex, Wacker Neuson, JCB, track loader, skid steer, trackloader, skidsteer, LonKing, Zoom Lion, Liugong, Sumitomo, Atlas Copco, Liebherr, Mitsubishi, Samsun, Toro, Mahindra, Massey Ferguson, New Holand, Lowboy, Low Boy , Cat,
-
48
Mikita rotary hammer. Has chisel setting. Used a handful of times. Dont need it anymore. A couple bits in the case cost over $100. Asking $450. $300 with no bits
-
49
Tools call 2893567722
-
50
Gang drill press...very heavy built. Power feeds with clutches.