Cars & vehicles with in Canada, British Columbia, Vancouver.
-
1
389 Tandem Sleeper Semi with 72in Sleeper - ISX 550HP 18 Spd 2050 Torque Super 40s - Full Lockers Sliding 5th Wheel Stock #:5210 Exterior Colour:Silver with White Striping Engine:Cummins ISX Horsepower:550 Transmission:18 Spd Front Axle:13,200 Rear Axle:Super 40s Gear Ratio:3.73 Frame:3/8s Brakes:Jake Suspension:Low Air Leaf Wheelbase:244.0 Mileage: 544K Miles / 875,483 Km ISX 550HP, 18 Spd, 13,200 x Super 40s Axles, Fully Loaded 72in Sleeper Cab with AM / FM / CD / NAV, Power Windows / Locks / Mirrors, Leather Seats, Full Gauge Package, Power Group, Full Lockers, Chain Hangers, Fenders, Sliding 5th Wheel, 544K Miles, Loaded!
Engine: CUMMINS ISX
Other Equipment- 1/4 Fenders|AM/FM/CD|Full Gauge Package|Full Lockers|GPS Navigation System|Leather Seats|Power Door Locks|Power Mirrors|Power Windows|Sliding 5th Wheel
-
2
367H Extended Day Cab Tri Drive - X15 565 HP 18 Spd - 2050 Torque 20K Front Axle Double Frame - Warranty till 2025 Stock #:5215 Exterior Colour:White with Black Striping Engine:Cummins X15 Horsepower:565 Transmission:18 Spd Front Axle:20,000 Rear Axle:69,000 Gear Ratio: 4.30 Frame: Double Brakes: Jake Suspension:Neway Wheelbase:268.0 Mileage: 292K Miles / 469,927 Km Cummins X15 565 HP, 18 Spd, 20x69 Axles, Power Group, Full Lockers, Power Windows / Mirrors / Locks, AM / FM / CD/NAV, Leather Seats, 23ft + of Clean Frame, Double Frame, Engine/AFT/Trans/Clutch/Diff Warranty Still Remaining, Loaded Unit, 292K Miles, Beauty!
Engine: CUMMINS X15
Other Equipment- AM/FM/CD|Full Lockers|GPS Navigation System|Leather Seats|Power Door Locks|Power Mirrors|Power Windows
-
3
T880 Tri Drive Day Cab - X15 565HP 2050 Torque 20K Front Axle Double Frame Full lockers Stock #:5220 Exterior Colour: Metallic Grey / Silver Fenders Engine:Cummins X15 Horsepower:565 Transmission:18 Spd Front Axle:20,000 Rear Axle:69,000 Gear Ratio: 4.30 Frame:Double Brakes:Jake Suspension:Neway Wheelbase:272.0 Mileage: 263K Miles / 423,257 Km X15 565 HP, 18 Spd, 20,000 x 69,000 Axles, Full Lockers, Power Group, Fully Loaded Interior with AM / FM / CD / NAV, Power Windows / Locks / Mirrors, Leather Seats, Off Road ABS, 25+ Feet of Clean Frame, 263K Miles, Beauty.
Engine: CUMMINS X15
Other Equipment- AM/FM/CD|Full Lockers|GPS Navigation System|Leather Seats|Power Door Locks|Power Mirrors|Power Windows
-
4
579 Tandem Axle Day Cab - 455 HP 13 Spd Auto - Full Lockers Sliding 5th Wheel Stock #:5192 Exterior Colour:White Engine:Paccar MX13 Horsepower:455 Transmission:13 Spd Auto Front Axle:13,200 Rear Axle:40,000 Gear Ratio: 3.70 Frame:3/8 Brakes:Jake Suspension:Low Air Leaf Wheelbase:196.0 Mileage: 360K Miles / 579,363 Km MX13 455 HP, 13 Spd Auto, 13,200 x 40,000, with AM / FM / CD, Bluetooth, Power Windows, Mirrors, Locks, Sliding 5th Wheel, Fenders, Chain Hangers Full Lockers, Power Group, Multiple Units Available, Beauty, 360K Miles.
Engine: Paccar MX13
Additional Options- 1/4 Fenders|AM/FM/CD|Bluetooth|Full Lockers|Power Door Locks|Power Mirrors|Power Windows|Sliding 5th Wheel
-
5
INEW COM M802 complete SSB package for offshore sailboat - read below for details
I purchased this for a boat project that did not happen and now it is time to let it go. The system consists of the following, all of which is brand new and never installed. All packages but one are unopened:
ICOM M802 unit consisting of tuning head, microphone, external speaker, and SSB unit ($1900 USD at West Marine)
GAM-MCKIM split lead antenna which slides up backstay without need for insulators or cutting backstay. Sells in usd for $465 at Seatech systems.
ICOM AT-140 automatic tuner, new in unopened box. Defender sells for $615USD
ICOM proprietary cabling to connect AT140 to SSB unit. Defender sells for $70USD
KISS SSB ground plane to use in lieu of under water ground plate ( ie no haulout needed to install). Seatech systems sells at $189USD.Value in $CAD: $4392
Asking price for complete kit: $2575 OBO
If you have your HAM license, ICOM will give you a code to open up the HAM bands for free.
-
6
NEW Sure Marine REAL hydronic air handler (bus heater) $275
10, 250 btu heater with fan and two ducts. Takes heat from engine cooling water. Great for heating cabin or cockpit while motoring. 'Free' heat ! Brand new, in box, complete with all fittings, ducts, and hose. Sure Marine currently sells this for $487-518 USD,
-
7
Questus 400G self levelling radar mount for sailboat backstay, NEW, $750
I purchased this new for an offshore project boat that didn't happen. This is best of class, heavy cast aluminum, rated for offshore hurricanes. Current price from Questus Marine Inc in Peabody Mass. is $1999 USD (gulp!) All mounting hardware, install manual, etc included. Brand new, been in dry storage. Go offshore with the best!
-
8
Davis Echomaster Aluminum Radar Reflector, used, $55/
compare to $148.99 plus tax new from local chandlery
Anchor Fender Step White, like new, $45
compare to $109.99 plus tax from local chandlery
Lewmar 15 kg galvanized claw (Bruce Style) anchor, new, $100
Compare at $280 plus tax at Trotac
Origo gimbal set, new, never installed, $100
compare at $149.99 plus tax USD at West Marine
Origo pot & pan holders, set of 2, new, $45
compare at $200+ on E-Bay
Nova Kool Ice Box Conversion kit model LT201, in box, new, $995
compare at $1399 plus tax at Steveston Marine
Dickinson 3”X22” Flue Guard, like new, $40
Compare at $102.95 plus tax at Steveston Marine
Lofrans Royal Manual windlass, excellent condition, no visible wear on gypsy or unit, $475
Compare at $1190 plus tax at the chandlery online.
Ships bell, cast brass, 7 inch diameter, excellent condition, $45
Compare at $140.21 plus tax at Chandlery online
West Marine Serving/Cutting/Filleting board, fits on coaming, hinged, new in box, $45
Compare at $150.99 plus tax at Chandlery online
Lewmar 2 speed size 40 standard aluminum winches, little use, serviced and ready to use, $150 each, 2 available
Hammock, cotton, blue and white, never used, $10
Brass trawler lamp, made in Holland by Den Han, excellent condition, $125
Compare at $349 at binnacle.com
Galley mixing faucet, solid brass construction, white finish, tall spout, folding and swivelling, by Barka of Italy, never installed, $45
Compare at $123.99 at binnacle.ca
Deck access hatch, white ABS, locking, Rough opening 10 ¾ x 27 ½, total footprint 13”x30”, can be used vertically or horizontally, rubber surface, non-skid surface, never installed - $50
¼” smoked cast acrylic for replacing crazed hatches, one piece of new, 48” X 39” ( 13 sf ) $125
and 4 pieces cut for exterior fixed portlights for a Mirage 33/35: 2 – approx. 10.5”x42” and 2- 10.5X37” - @ $25 each
Contact me with your questions!
-
9
Thunderbird For Sale Dodo #117 (previously J-Bird) is located at RVYC Jericho in Vancouver BC. $ 5,000 CAD This is an awesome boat that needs a new home. I no longer have the time to maintain this boat and I don’t want to see it deteriorate. It needs a bit of work but nothing major. The cockpit hatches need to be redone and the brightwork needs updating, etc. If you happen to know anything about this boat's past I'd love to hear about it. Dodo was saved during a 2021 refit. Three of the four chainplates and a forward cleat had rotted the hull and deck. During the refit, all of the rotted wood was removed, patched and reinforced. The boat is structurally sound. Sails: 2x Mainsails 1x Genoa 2x Jibs 2x Spinnakers Everything else: 8hp 1990s Evinrude 2 Stroke 60L Aluminum Fresh Water Forced Air Diesel Heater (75% installed, propane heater in the interior picture is not included with the boat) Running Rigging: Synthetic braid internal to mast Ground Tackle: 7.5 kg. Bruce claw anchor with 20 feet 3/8” chain and 150 feet ½” gold braid rode Self Contained Toilet plumbed with "Y" valve VHF Radio Knot Meter Depth Sounder Electric Bilge Pump: electric with float switch Manual Bilge Pump: Whale Gusher manual bilge pump with foot valve Galley: 2 burner propane cooktop with integrated sink with flip up faucet Windows replaced in 2020
-
10
30 yds 60" Navy Blue Sunbrella $995
This was purchased about 18 months ago for a project that is now not going to happen. It is a single piece, in a roll, exactly as it came from the supplier. Save yourself a fortune and make your own dodger, bimini, helm, winch, and hatch covers!
-
11
- Very good condition
- 1 x standard sail (old), 1 x Intensity Sails radial
- 1 x standard, 1 x radial bottom mast sections
- 2 x top sections
- board bag
- spar bag
- boat cover
- Dynamic dolly
- wind indicator
- Analog compass
- race ready, all required blocks and sheets
-
12
Colorado XT pontoon boat purchased in 2023, used up to 5 times, comes with 2 rod holders (and only 1 rod holder out of the box), oars, swivel seat, 2 tackle bags, anchor system and folding wheel!
Excellent condition, ready for fishing!
-
13
This classic 1985 Bluewater Costal Cruiser 51C will be right at home cruising inland waterways and lakes or costal ocean waters.
The lower profile stands out against trawlers and aft cabin cruisers of a similar size and makes boarding the boat from the dock a simple walk on vs. climbing ladders. The 14.5ft. beam creates a wealth of interior space all throughout the boat as well.
A lot of real estate on the water
An Ideal Live Aboard or Charter Yacht, with her great charter history.
Tom Cruise, Jack Nicholson and Tommy lee Jones signed the guest log while chartering this yacht!
Charters at $1200 a day.
Yachts rails raised in refit to comply with safety compliance.
Two Stateroom configuration with Two ensuite electric heads and showers with a Bathtub in Master stateroom.
Her Thick Fiberglass hull is ideal for beaching in shallow water as she only drafts 24” of water allowing for ladder access points at both the bow and stern.With 35feet of upper deck, upper deck and main salon.
New Radio/Bluetooth sound systems
New Lithium-Ion House batteries
New inverter/charging system
Two – 30 Amp shore power inlets
Shorepower cords and Y adaptorEngine 1
Engine Make CRUSADER
Engine Model Model 350 - 454 CI
Total Power 350hp
Engine Hours 2787 HRS
Engine Type Inboard Fresh Water cooled
Drive Type Direct Velvet Drives
Fuel Type Gas
Engine 2
Engine Make CRUSADER
Engine Model Model 350 - 454 CI
Total Power 350hp
Engine Hours 1933 HRS
Engine Type Inboard Fresh Water cooled
Drive Type Direct Velvet Drives
Fuel Type GasTwin Chevy (Crusader) 454 FRESH WATER COOLED V8 main engines with velvet drives running conventional shafts and propellers and tunnel drives.
Halon Fire suppression system in engine compartment Engines:
Depth finder
VHF marine radio
Chart Plotter
Other features:
Ice Maker
Large leather sofa Hide a bed
Full size residential fridge
Double stainless sink
Electric stove
20 gallon water heater
All aluminum tanks
SPECIFICATIONS
Speed & Distance
Cruising Speed 12kn
Max Speed 18kn
Dimensions
Length Overall 51ft
Max Draft 2ft
Beam 14ft
Weights
Dry Weight 26,000Lb
Miscellaneous
Windlass Electric Windlass
Electrical Circuit 12V
Tanks
Fresh Water Tank 1 X 100 Gal ()
Fuel Tank 1 X 320 Gal ()
Holding Tank 1 X 65 Gal ()
Accommodations
Double Berths 2
Cabins 2
Heads 2Currently in the beautiful Gulf Islands British Columbia / Salt Spring Island
-
14
NEW Nova Kool LT201 Icebox conversion kit $995
I bought this for a project boat that didn't happen, and never took it out of the box. It is low power usage, and sells for approx $1399 plus tax at local chandleries. Everything is included in this kit to turn an icebox into a very efficient refrigerator/freezer. See expanded photo below.
-
15
The brand new TC-12 Tree Chipper from DuraTech incorporates the grinding technology found in its large tub and horizontal grinders.
It is equipped with a 129 hp (96 kw) CAT C4.4 diesel engine or a Kubota V3800 88 hp (74 kw) and PT-Tech clutch, enabling it to efficiently grind trees and limbs with a diameter of up to 12 inches.
The TC-12 offers several features including a spring-loaded feed wheel with adjustable down pressure, an optional height sensor that automatically adjusts the feed roller to match the material size, an optional hydraulic gathering winch, and innovative hopper safety bars that allow for easy and instant feed wheel shut off.
This heavy-duty chipper is available with either a pintle or ball hitch and is compact enough to be easily towed to any location.
Get chipping today with the new TC-12 Wood Chipper!
-
16
The brand new TC-12 Tree Chipper from DuraTech incorporates the grinding technology found in its large tub and horizontal grinders.
It is equipped with a 129 hp (96 kw) CAT C4.4 diesel engine or a Kubota V3800 88 hp (74 kw) and PT-Tech clutch, enabling it to efficiently grind trees and limbs with a diameter of up to 12 inches.
The TC-12 offers several features including a spring-loaded feed wheel with adjustable down pressure, an optional height sensor that automatically adjusts the feed roller to match the material size, an optional hydraulic gathering winch, and innovative hopper safety bars that allow for easy and instant feed wheel shut off.
This heavy-duty chipper is available with either a pintle or ball hitch and is compact enough to be easily towed to any location.
Get chipping today with the new TC-12 Wood Chipper!
Priced in CAD
-
17
30 yds 60" Navy Blue Sunbrella $995
This was purchased about 18 months ago for a project that is now not going to happen. It is a single piece, in a roll, exactly as it came from the supplier. Save yourself a fortune and make your own dodger, bimini, helm, winch, and hatch covers!
-
18
- Very good condition
- 1 x standard sail (old), 1 x Intensity Sails radial
- 1 x standard, 1 x radial bottom mast sections
- 2 x top sections
- board bag
- spar bag
- boat cover
- Dynamic dolly
- wind indicator
- Analog compass
- race ready, all required blocks and sheets
-
19
Duratech HD12 “Big Bite” w/ grapple loader
- Cat 3412 (12 cylinder) 700 hp, with less than 1200 hours - 12’ tub, 27’ stacking conveyor. - 90% of the hoses were changed on the grinder, as well as 95% of the hoses were just recently changed on the loader. - Brand new shanks and teeth. - New conveyor belts. - Recently re-painted. - Very well maintained low hour grinder - Just went through our shop and is ready to be put to work.
Can be delivered to the US.
-
20
Colorado XT pontoon boat purchased in 2023, used up to 5 times, comes with 2 rod holders (and only 1 rod holder out of the box), oars, swivel seat, 2 tackle bags, anchor system and folding wheel!
Excellent condition, ready for fishing!
-
21
2004 3010 Duratech Tub Grinder
- Comes with a 5th wheel hitch
- 475 horsepower
- C-15 Cat, with only 3100 hours
- 10’ Tub
- New belly and stacker belts
- New shanks
- Remote control
- 27’ swing conveyor$239,999 CND
Please feel free to contact me with any questions or concerns
-
22
Duratech HD12 “Big Bite” w/ grapple loader
- Cat 3412 (12 cylinder) 700 hp, with less than 1200 hours
- 12’ tub, 27’ stacking conveyor.
- 90% of the hoses were changed on the grinder, as well as 95% of the hoses were just recently changed on the loader.
- Brand new shanks and teeth.
- New conveyor belts.
- Recently re-painted.
- Very well maintained low hour grinder
- Just went through our shop and is ready to be put to work.Price is in CND Dollars.
Can be delivered to the US.
-
23
NEW Nova Kool LT201 Icebox conversion kit $995
I bought this for a project boat that didn't happen, and never took it out of the box. It is low power usage, and sells for approx $1399 plus tax at local chandleries. Everything is included in this kit to turn an icebox into a very efficient refrigerator/freezer. See expanded photo below.
-
24
Dosen Diesel Powered Light Tower
-
25
EXCAVATOR
BRAND NEW 175 HYDRAULIC HORSEPOWER SHEET PILE DRIVER QUALITY BUILT IN THE NETHERLANDS FROM A COMPANY THAT HAS BEEN BUILDING ATTACHMENTS FOR 25 PLUS YEARS
360 DEGREE CONTINUOUS ROTATION - LOCKING SHEET PILE CLAMP SYSTEM TO SECURE FOR PICKING AND DRIVING PILES
AND FOR PULLING PILES OFFERING:
85 TONS OF ECCENTRIC FORCE
75 TONS OF VIBRATION FORCE
FREQUENCY OF 2800
HYDRAULIC PRESSURE - 320 BAR
HYDRAULIC FLOW 260 LPM
2 LARGE ECCENTRICS AND 12 VIBRATION ISOLATORS
175 HYDRAULIC HORSEPOWER SHEET PILE DRIVER AT THE HEAD POWERED BY EXCAVATOR AUXILARY HYDRAULIC CIRCUIT - NO REMOTE POWER PACKS REQUIRED
EXCAVATOR CLASS 45-65 TON
EXTENSION ARM WEIGHT 800 KG
COMES COMPLETE WITH ALL HOSES AND THE EXTENSION ARM
THIS IS SET UP BUSHED DOWN WITH 100 MM PINS - BUT SET UP TO TAKE 110 - 120 MM PINS
WE BOUGHT TO PUT ON OUR LONG REACH CUSTOM BUILT 1.3 MILLION PC450LC-8 TO TO REPLACE LARGE CRANES TO DRIVE 40-50-60 SHEET PILES IN TIGHT LOCATIONS
THIS MACHINE CAN DRIVE 40-50-60 FOOT SHEETS PILE REPLACES LARGE CRANE MOUNTED UNITS WITH POWERPAK HYDRAULIC UNITS AND REDUCES YOUR CREW FROM A 4 OR 5 MAN CREW TO 2 AND WILL DRIVE 4 TIMES AS MANY SHEETS PER HOUR PLUS READY TO DRIVE PILES 1/2 HOUR AFTER ARRIVING ON-SITE NOT A DAY LIKE CRANES AND WILL WORK IN TIGHT LOCATION AND SWAMP GROUND JUST USING WOOD PADS IF REQUIRED
MACHINE THEN CAN BE USED ON THE JOB FOR ALL EXCAVATOR WORK REQUIRED - THEN REMOVE THE SHEET PILES WHEN THE EXCAVATION IS DONE - NO SECOND MACHINE REQUIRED - THIS MACHINE WAS PUT TOGETHER FOR A LARGE JOB IN SWAMPY GROUND FOR BUILDING A BRIDGE WHERE THERE WERE 40 FOUNDATIONS THAT WERE 30 FEET WIDE X 50 LONG THAT AFTER DRVING THE SHEETS NEEDED TO BE EXCAVATED TO A DEPTH OF 20 FEET - BUT DUE TO COVID THAT JOB WAS PUT AND REMAINS ON HOLD.
THIS IS NOT A SPAGETTI BOOM LONG REACH - USE LARGE 12000 ft lb HYDRAULIC HAMMERS - 10,000 LB HYDRAULIC DEMOLITION PROCESSORS - GRAPPLES - HYDRAULIC DUAL DRUM GRINDERS - PLATE COMPACTORS - DIG WITH VARIOUS BUCKETS UP TO 4 YARDS ALL WITH ONE MACHINE
OR TAKE THIS SHEET PILE UNIT FOR $125,000.00 AND WE HAVE A PROFESSIONAL APPRAISAL ON IT FOR $220,000.00 - SINCE THAT APPRAISAL STEEL AND COST OF MANUFACTURING HAVE ALL INCREASED DRAMATICALLY
HAVE FACTORY INSTALLATION AND PARTS AND OPERATOR'S MANUAL
OR FOR SALE WITH THE KOMATSU LONG REACH FOR $500,000 - SEE MY OTHER ADS FOR THIS VERSATILE MACHINE READY TO WORK NOW WITH THIS SHEET PILE HEAD
FRANK 604-476-7777
FROM THE HYDRARAM WEBSITE:
Hydraram, we bring the muscle!
Hydraram has been producing attachments for use in demolition, recycling and green industry for over 25 years.
We supply a complete line of hydraulic attachments for excavators from 1 to 300 tons.
We specialize in all hydraulic attachments for all types of excavators.
The Hydraram products stand for quality, durability and productivity! Hydraram attachments are used around the world every day by many international companies in the the civil engineering sector, demolition, scrap processing, as well as recycling and forestry companies.
We sell our equipment through an extensive dealer network which provides perfect service. Because of this, we are able to help you choose the right attachment, and receive perfect after-sales support, maintenance and repairs.
With us you are at the right place for:
* New attachments
* Used attachments
* Rental (by HYDRARENT)
* Service & maintenance
* Repairs
* New & used partsWe always have the correct type of attachment. They are of high quality, durable, and always made to match your needs and requirements. Keeping attachments in stock helps us keep shipping times as short as possible.
NOTE: The Appraisal Shown in Image 6 does not take into account the cost of the New $150,000.00 Factory Komatsu Log Loader Boom c/w pins and cylinders or the cost of Importing the HydraRam Sheet Pile Driver from Europe or the $200,000.00 plus spent to complete the machine to its current finished state.
-
26
THIS BRAND NEW NEVER INSTALLED BUCKET DOES IT ALL WITHOUT CHANGING BUCKETS - MAKES A THUMB OBSOLETE AND WORKS THRU THE ENTIRE BUCKET ROTATION -SEE YOUTUBE VIDEOS:
https://youtube.com/watch?v=VYxdToqeleI
https://youtu.be/BV5EeyGm5OM
APPLICATIONS :
FORESTRY • PIPELINE • ROAD BUILDING • RIPRAP • MINING • DEMOLITION • MARINE/DREDGING
WASTE MANAGEMENT • SOIL REMEDIATION • SCREENING • TRUCK LOADING FOR ALL MATERIALSEXCAVATOR CLASSES FOR THIS 60 INCH XHAND WILL FIT ALL 200 / 250 / 300 - CURRENTLY SETUP WITH WBM LUGGING FOR 200-240 CLASS MACHINES
TAKE THIS $60,000.00 PLUS BUCKET FOR $30,000.00 AND HAVE WORKING NOW - NOT WAIT 4 MONTHS TO HAVE ONE BUILT
WE SHIP QUICKLY AND GET GREAT RATES
FRANK 604-476-7777 OR TOLL FREE 1- (833) 693-9323
ONLY REQUIRES 1 HAMMER OR HOEPACK HYDRAULIC CIRCUIT AND JOY STICK ELECTRIC CONTROL TO RUN AS CONTROLLEDS BY DAN FOSS VALVES.
DIGGING: Digging and clean-up capabilities in ONE attachment - SEE VIDEO
https://youtu.be/dkm0dxBI5BU
ROAD BUILDING -
https://youtu.be/DSooBNHheLs
DOZING Moving material forward and back, with double edge grading functionality - SEE VIDEO
https://youtu.be/5-girnvgBr0
SHOVEL LOADING Forward loading from the ground up for increased efficiency - SEE VIDEO
https://youtu.be/hifN_8J5n5M
GRABBING Full-width double-sided grabbing for maximum productivity - SEE VIDEO
https://youtu.be/95FmPIOywA4
SCREENING Filtering debris using both screening surfaces, saving time and money
https://youtu.be/a3-0p5oB5ko
PILING BRUSH - MOVING LOGS -
https://youtu.be/zQbNwrE5Y3c
EXCAVATOR CLASSES FOR THIS 60 INCH XHAND 200 / 250 / 300
SCREEN SIZE OPTIONS - 3″
After attending the Canada North Resources Expo held in Prince George on May 26th and 27th, 2017; XHand Inc. was featured as a noteworthy exhibitor at the event.
A highlight video was produced, speaking with XHand Inc. President, Dean Perrey.
Logging and Sawmilling JournalMay 2017 – Prince George
Also following the attendance at the Canada North Resources Expo, XHand Inc was featured by an article written and published in the Logging and Sawmilling Journal.
-
27
367
2023 peterbilt 367 Extended Cab with comercial highlift steel box. Plumbed for qurd and pup 84,000km 1900 hours. Truck is working everyday and will change. Cummins x15 565/2050 eaton 18spd 4.10 gear ratio and 46 diff. Extended warranty engine and after treatment, cooling system 5year/480k with towing packages. Arne Qurd wagon 2007 available also. Unit price $333000
-
28
26ft box
Aluminum tailgate 3500lb capacity
98’ clearance
Hydraulic Brakes
-
29
RARE LOW HOUR 2019 22000 LB MINING SERIES LITTLE USED RIPPER FOR ROCK - SHALE - SANDSTONE WAS ON PC650 KOMATSU WORTH $300,000.00 PLUS NEW
IMAGE 3 SHOWS THE PRODUCTION COMPARISON BETWEEN A HR50 WHICH IS A TOY COMPARED TO MY HR82 MINING SERIES AND THE HR50 PRODUCTION IN TWO HOURS COMPARED TO A HYDRAULIC HAMMER VIDEO HERE (just copy and paste) :
https://www.youtube.com/watch?v=1EpaZbRGUag&t=4s
IMAGE 4 SHOWS WHAT SHEARORCE WANTS FOR A WELL USED HR52 - $158,000.00 WHICH AGAIN IS A TOY COMPARED TO THIS HR82 WHICH WEIGHS MORE THAN TWICE WHAT THE HR52 DOES
PERFECT FOR GOLD MINERS FOR THE TOUGHEST PERMAFROST ON SLOPES AND HILLS AND HOLES WHERE YOUR CRAWLERS CAN NOT ACCESS
BUILT JUNE - 2018 IN ITALY BY XCENTRIC RIPPER SERIAL # 18062501 - PUT IN SERVICE IN FALL 2019 - LITTLE USED DUE TO COVID
Note: The paint was touched up but those are the original factory decals on the ripper and the ripper had a re-enforcing plate welded into a known weak spot on both sides of the main ripper shank as preventative maintenance (never cracked as new shank).
The unit is ready to work - needs nothing.
CLEAR TITLE READY TO WORK NOW
SEE IMAGE 4 AND 5 FOR WHAT SHEARFORCE WANTS FOR A COUPLE OF USED HR42s AND HR 52'S - $158,000.00 ? - BOTH OF WHICH ARE WELL USED TOYS COMPARED TO THIS RIPPER
SEE THE PDF FILE INSTRUCTION MANUALS FOR ALL DETAILS - COPY AND PASTE:
https://www.shearforce.ca/wp-content/uploads/XR-MINING-SERIES-Instruction-Manual.pdf
https://bossattachments.com.au/wp-content/uploads/2020/05/boss-au-xcentric-ripper-xr.pdf
https://xcentricripper.com/wp-content/uploads/2019/05/FICHA-RIPPER-XR82_ENG.pdf
http://www.dbflimited.com/Resim/Upload/miningseriesripperenglish1.pdf
The XR82 key features as per Xcentric:
• Suitable for 70t-90t Excavators the XR82 weighs in at 10,000kg (WILL WORK ON 600 OR 650 CLASS WITH SHORT STICK HAS 120 MM MAIN PIN AND 110 MM SECONDARY ON WITH 22.25 INCHES BETWEEN THE EARS)
• 5 times higher production than conventional rock breakers
• A safe and easy alternative to drill and blast options
• New slim body design makes the XR Mining series perfect for trenching applications.
• Minimum noise levels
• Minimum maintenance
• No daily lubrication is required
• Minimum wear parts consumption
• Long-life components and materials
• Less fuel consumption per produced m3/ton
• Less emission per produced m3/ton
• Environmental protection (Bio Lubricants)
• Marine/underwater operation.
• Can be used on standard excavators.
• Increase operator comfort.
• HARDOX® & Strenx construction ensures long-lasting durability in extreme conditions.
• Designed and manufactured in Spain by Xcentric International, only the best materials are
used for excellent quality. Solid, durable, and characterized by the now recognizable clean lines
designed to resist wear and high stresses in the toughest working conditions.
• Extreme compactness and low center of gravity improves balance and drastically reduce the
strain on the excavator's arm, eliminating impact vibrations.Introducing the Xcentric Ripper® hydraulic ripper. A revolution in high-volume excavation and demolition.
After more than 10 years of development in the design and manufacture of the world's most productive, reliable, and technologically advanced hydraulic ripper, Xcentric International has taken the Xcentric Ripper range to a whole new level with the release of the all-new Xcentric Ripper Mining Series.
The Xcentric Ripper® outperforms traditional hydraulic hammers in nearly every type of material, particularly in medium hardness rock with natural fracturing and layers. Using patented Impact Vibration Accumulation Technology, the attachment works with the natural rigidity of the rock, and the vibrations that are produced shake the material to deepen cracks for easier breakup. It is an exceptional tool for frozen ground excavation, demolition, rock excavation, slag recycling, dredging, trenching, underground mining, and even underwater applications.
XR mining series range
• Easy operation with low noise.
• Unbelievable power and versatility.
• Easy on your machine’s pins and bushings.
• Low maintenance.
• Field replaceable ripper teeth.
• Patented impact vibration accumulation technology.
• A safe, easy, and environmentally friendly alternative to drilling and blasting options.One of our customers in the pile and dredging industry was searching for an excavation tool that could be deployed for a three-month project which included the removal of more than 40,000 yards of basalt from shoreline to make way for a new harbor and breakwater for incoming marine traffic.
The superintendent saw a video of the new Xcentric Ripper Mining Series working online and decided to give the new more powerful version of the hydraulic ripper a chance to prove it belonged in their arsenal of excavation tools.
“We have the XR82 model working on one machine and a clamshell bucket for dredging on the other,” he said. “We needed a tool that would work well underwater and the XR82 has performed to our expectations so far. I see it proving valuable as an asset in our equipment fleet and working really well on some of our more specialty projects.”
Mining Series Design Improvements
While the working technology is based on the standard series, the new Mining Series has been reinforced with a remodeled working platform, which delivers a much higher energy impact force to the work tool with a lower frequency. Larger and heavier eccentric gears are now machined from a single billet of steel and precisely designed to allow for equal weight distribution side-to-side and direct impact energy vertically.
The lower pivot arm and housing is reinforced to limit wear where the ripper typically encounters material, and the ripper arm or beak has been remodeled and reinforced with Hardox® steel. The XR Mining Series also has a narrower body profile, making it ideal for tunneling or operating in confined areas.
Designed to increase production, at lower operating costs, and reduced noise levels, the all-new XR Mining Series is a revolution for high-volume rock excavation. Like the regular series that came before it, the Mining Series will be an invaluable tool for frozen ground excavation, rock excavation, quarrying, surface and underground mining, oil sands excavation, utility project installations, pipeline trenching, demolition, slag recycling, dredging, and even underwater applications.
Visit the Xcentric Ripper page:
https://www.shearforce.ca/equipment/xcentric-ripper/ to learn more and watch video of the Xcentric Ripper® Mining Series in actionWATCH THE VIDEOS COPY AND PASTE:
https://youtu.be/C3LLh0fSjk4
https://youtu.be/Z_dNJYRlpyg
https://youtu.be/G3lSGXuxv9s.
NEW COST OVER $300,000.00 TAKE IT FOR $100,000.00 AND WE WILL SHIP QUICKLY = HAVE ON THE JOB NEXT WEEK
THIS UNIT WILL FIT THE FOLLOWING MACHINES WITH A HYDRAULIC PIN GRABBER COUPLER:
Case CX800
Caterpillar 365B L w/ VB Link
Caterpillar 365C w/ Reach Linkage
Caterpillar 375
Caterpillar 375 w/ Mass Linkage
Caterpillar 375 w/ Reach Linkage
Caterpillar 375CL
Caterpillar 385B
Caterpillar 385B
Caterpillar 385B LHitachi Zaxis 650LC-3 BE Arm
Hitachi Zaxis 650LC-3 H Arm
Hitachi Zaxis 670LCH-3 BE Arm
Hitachi Zaxis 670LCH-3 H Arm
Hitachi Zaxis 800 & BE
Hitachi Zaxis 850-3 BE Arm
Hitachi Zaxis 850-3 H Arm
Hitachi Zaxis 850LC-3
Hitachi Zaxis 850-LC-3 BE Arm
Hitachi Zaxis 850-LC-3 H Arm
Hitachi Zaxis 870H-3 BE Arm
Hitachi Zaxis 870H-3 H Arm
Hitachi Zaxis 870LCH-3 BE Arm
Hitachi Zaxis 870LCH-3 H Arm
Hitachi Zaxis 870LCR-3 BE Arm
Hitachi Zaxis 870LCR-3 H Arm
Hitachi Zaxis 870R-3 BE Arm
Hitachi Zaxis 870R-3 H ArmJohn Deere 600CLC & ME
John Deere 650DLC
John Deere 710G Std or Ext Stick
John Deere 710J Std or Ext Stick
John Deere 800 C & ME
John Deere 850D LCKobelco SK850LC
KOMATSU
PC600
PC600LC-6
PC600LC-7
PC600LC-8
PC600LC-8
PC650SE-3
PC650-6
PC750-6
PC750-6
PC750SE-6
PC800LC-7Link-Belt 800 QUANTUM
Link-Belt 8000 QUANTUM
Link-Belt 8000 QUANTUM MASSVolvo EC700B
Volvo EC700C
VOLVO EC800
-
30
COMPLETE SET OF MINT AS NEW LOW HOUR USEAGE ALL COMPLETE WITH AS NEW TEETH HENSLEY ADCO EXTREME DUTY AR 400 STEEL BUCKETS WORTH OVER $50,000.00 USD OR 68,000.00 CDN FROM OUR PC450LC-8 WHICH HAS LESS THAN 7300 HOURS ON IT AND WAS USED MAINLY FOR GRAPPLES AND DEMOLITION PROCESSORS
ALSO A NEW GEITH HYDRAULIC PIN GRABBER COUPLER C/W NEW PINS FITS KOMATSU PC400-PC490 DOOSAN 340 - DAEWOO DX 340 - CATERPILLAR 330D L w/ DB Link
IT HAS 100 MM PINS WITH 16.25 INCHES BETWEEN THE EARS CAN BE MODIFIED OR YOU COULD BUSH DOWN TO 90 MM PINS AND FIT MOST 300 - 350 CLASS EXCAVATORS
GEITH IS THE CADILLAC OF COUPLERS AND THE ONLY ONE WE USE
WE BOUGHT TO PUT ON OUR PC450LC-8 KOMATSU BUT IT ALREADY HAS A PERFECT COUPLER
IT WAS BUILT BY GEITH AND TAGGED FOR DOOSAN 340 BUT TAG EASILY REMOVED
THESE NEW ARE NOW $18,000.00 AND 16 WEEKS OUT
TAKE THIS NEW ONE FOR $10000.00 C/W THE NEW PINS - IT IS OUR NB YARD BUT EASILY SHIPPED FOR NO COST TO YOU IF YOU TAKE THE
SET OF BUCKETS.THIS SET OF HIGH QUALITY STEEL USA BUILT QUALITY BUCKETS CONSIST OF:
1) CLEANUP - BULK LOADING TOUGH MATERIAL SUCH AS CONCRETE - ROCK LIMESTONE - SHALE - SANDSTONE - COAL BUCKET
70 INCHES WIDE BUT DEEP FOR LOADING TRUCKS OVER THE REAR WITH NO SPILLAGE
THIS IS A RARE TOOTHED 4 YARD HEAPED - DEEP CLEANUP - BULK MATERIAL BUCKET WE USED FOR LOADING OUT BULK ROCK AND CONCRETE - 3 BUCKETS TRUCK IS GONE
AND RIPPING SHALE AND LIMESTONE ON OUR PC 450-LC-8 KOMATSU EXCAVATOR
BUCKET IS IN EXCELLENT CONDITION WITH MULTIPLE TEETH FOR RIPPING AND LOADING THAT ARE SPACED SIDE BY SIDE FOR STRENGTH AND CUTTING - LEAVES SMOOTH EXCAVATION BUT DIGS THROUGH CRUSHED CONCRETE AND ROCK WITH EASE
THIS BUCKET COST OVER $20,000.00 USD
TAKE THIS ONE FOR $10,000.00
2) 46 EXTREME DUTY DIGGING BUCKET C/W NEW KOMATUS TEETH - SIDE CUTTERS HOURS OF HARD SURFACING WELDING DONE READY TO WORK TAKE THIS ONE FOR $10,000.00
3) 30 INCH EXTREME DUTY V RIPPER BUCKET C/W ALL NEW TIGER TEETH INSTALLED - BUCKET AS NEW READY TO WORK. TAKE THIS ONE FOR $8000.00
TAKE THE COMPLET SET OF RARE EXTREME DUTY BUCKETS FOR $25,000.00
OR TAKE ALL BUCKETS AND THE GEITH COUPLER FOR $35,000.00 ALL SHIPPED TO YOU - READY TO INSTALL AND WORK NOW NOT WAIT 4 - 6 MONTHS OR NEED SHIPPING FROM US WITH CUSTOMS ETC
WILL SHIP QUICKLY AND WE GET GREAT RATES FROM OUR YARD LANGLEY BC OR IF YOU TAKE ALL - WE WILL PAY THE TRUCKING !!
Whether the task at hand involves general excavation or severe digging, regardless of the material, Hensley Attachments has the right excavator bucket for your application. The world famous, and often imitated, V-Rock bucket originated in this Mansfield, Texas shop. Hensley Attachments also makes a series of traditional excavator buckets equipped with built-in reinforcements that reduce downtime. The General Purpose, Heavy Duty, Severe Duty, and Extreme Service Duty excavator buckets also come with a cast lifting eye, and optional sidecutters.
STANDARD FEATURES ON ALL THESE BUCKETS HAVE:
* Dual taper / dual radius design
* One piece blade (T-1)
* Upper and lower side kick plate (400 BHN)
* Full bottom wear plate (400 BHN)
* Horizontal wear strips (400 BHN)
* One piece side plate
* Strike-off assemblies
* Lip (T-1)
* Formed beam upper structure
* Increased material thicknesses in high wear areas
* Cast heel wear shrouds
* Optional Bimetallic wear resistant productsRECOMMENDED APPLICATIONS:
* Granite
* Ore
* Limestone - Shale -
* Broken Slag
-
31
- 435 hours
- Tractor comes with a loader only. (backhoe & forks are not included.)
-
32
Selling KUBOTA M7060HDCC12 CAB TRACTOR
***Very low hours just 390 total***
Condition: Like new- 70HP KUBOTA DIESEL ENGINE
- 4WD
- CAB WITH HEAT &A/C
- BLUETOOTH RADIO
- 12X12 TRANSMISSION WITH SHUTTLE SHIFT
- TWO REAR REMOTE HYDRAULICS
- 11.2-20 AG TIRES
- 14.9-28 AG TIRES
- Engine replaced at 214 hours by Kubota just because of fuel vandalism.
-Clean titleAlso Includes:
- KUBOTA M26-1 SELF-LEVELLING LOADER
- BE HD4442A0600 PALLET FORKS
-
33
1979 Case 580 2wd Full Size Backhoe Loader
- Diesel 4 cylinder
- New injectors
- Fully enclosed cab
- Front end wheel loader bucket
- Rear digging backhoe excavator bucket
- Good tires
- local in Surrey BCPlease text Jason at 7788092510 to inquire
-
34
Kms
963,000.00 Kms
-
35
Putting feelers out on my 72 Camaro RS. Car has about 1500km after complete restoration. Car has been stripped to metal and properly resorted with full photo documentation. Engine, trans, and diff are all fully rebuilt.
1972 Camaro
Split bumper front end w nose
Blue w white rally stripes
Cowl hood
Local car
Full restoration body stripped to metal
454 BB
PW alum heads
March pulleys
Moroso oil pan
ST10 4spd
McLeod clutch
8.5” 10bolt diff
373 posi
Headman headers
3” header back custom exhaust w H pipe
10 bolt rear end
373 gears
Quick ratio steering box
Subframe connectors
QA1 front coil overs
QA1 front sway bar
Rear lowering springs
Alum rad
Flex lite e fan
Dakota digital gauges
New interior
Pioneer stereo w alpine speakers
18x8 18x9.5 ridler wheels
225 + 275 michelin sport tiresWon’t take a penny less than 75k, comes with huge stack of receipts. I will not respond to is this still available. No tire kickers and time wasters. Test drives available with full payment in my hand. Car isn’t ready to go yet, still have a few minor things to do so this is just a feeler.
-
36
Very solid car ready for a motor everything is there it is a 4 speed car Tach in hood buckets console etc.
-
37
Hello, I’m searching for this 64 Corvette that I used to own.
VIN 40837S100147
It’s Silver Blue/Dark blue vinyl.
327, 2spd Automatic, PW
The current owner would’ve bought it in Strathmore AB, 2002.
Any help finding the current owner would be greatly appreciated!
Thank you
Dan 780-982-5130
-
38
Comet
1964 Comet Caliente Convertible
Lost my storage space
I put a lot of work and money into the car
Now it’s time to let it go to a new home
New breaks and break lines
New muffler
New radiator
New wiring throughout
New gauges
New starter
Rebuilt transmission
New rear air shocks
New battery and moreAsking $36000
Angelo 604 454-4540
No emails please
-
39
1970 duster 340 4 speed pistol grip. New OEM front end, new stereo, heater. Runs and drives straight and stops good. Interior very good, dash has no cracks, carpet in good condition. Striking color with flat black finish. Shows well, more pics if required.
PHONE CALLS ONLY.
Call Al @ Six Zero Four 644 6789
-
40
2015 Can-Am Spyder RT Ltd with trailer in excellent condition with only 11,650 KM.
Top of the line semi-automatic model with GPS, heated grips for rider and passenger, ultra comfort touring saddle, foot boards, highway pegs, cup holder, matching travel bag and more.Purchase Options:
- Can Am Spyder, trailer and accessories: $28,000- Can Am Spyder: $23,000.
- Trailer, hitch and wiring harness: $5,000
- Accessories as priced in link below:
https://rolls.bublup.com/bill/CanamSee link for spec sheet:
https://www.motorcycle.com/specs/can-am/sport-touring/2015/spyder-rt/limited/detail.html
-
41
1931 Ford Deluxe Roadster. Off frame show quality restoration using original parts. Every available option. Runs and drives like it looks
-
42
Selling my 1965 Pontiac Parisienne Custom Sport.
283 (4.6L), Powerglide.
Hundreds of hours invested in fixing it and thousands of dollars in parts.
Car runs and drives, needs 3 out of 4 brakes serviced and some brake hard lines replaced.
Floors are cleaned and treated with POR15 3 step rust protection (there are a couple 1mm holes on the driver floor pan and in the trunk), overall in good shape.
Roof treated, channels fixed, new vinyl top installed.
The interior will need to be reupholstered so it's one color. New rear panels included.
Transmission is dripping, but works fine, will need to be checked.
Needs new tires, brake job, maintenance and it's ready to go back on the road.Funny fact - the original owner in 1965 is Marge Simpson.
-
43
1929 Ford Model A Sedan like new. Fully restored 3 years ago. Off frame restoration, steel body, new paint, under side all finished like new. It is powered by a honda v6 700r4 transmission. Jaguar rear end, 4 wheel disc brakes, gauges, heater, all new interior and carpets. Execellent drive and lots of power and steers well. Costed $70,000 to restore and only 3600 km put on car since. Needs nothing turn key. Very economical car, goes forever on 1 tank of fuel.
CALL AL @ Six Zero Four 644 6789
No text messages
-
44
1968 Camaro , rebuilt engine , new rings , bearings, cam, lifters , timing chain & gear set , valve grind , Holley carb, headers , dual exhaust , Muncie 4 speed transmission , hurst shifter , 12 bolt posi differential electronic ignition , bucket seats ,console, all suspension removed , bead blasted , painted ,restored , beautiful paint , bottom of car as nice as top of car ,must be seen to appreciate , runs & drives great , need no help selling thanks, collector plated
-
45
Brand New WCL Low Profile DOT approved Helmets
Available in either Beanie style or Polo style
Both styles available in either Flat Black or Gloss Black
Sizes Available: XXS - XXL
$99ea.
-
46
Rev up your style game with the 1981 Mercedes-Benz 380SL in Silver Blue Metallic – a showstopper from the iconic R107 SL-Class! Ready for a V8-powered adventure? This classic beauty, adopted in 2020, is now your ticket to turning heads on Vancouver streets! ️ #ClassicCarVancouver #MercedesBenz380SL
Whether you're rocking the blue convertible soft top or the sleek hardtop roof, this ride is your daily dose of glamour. Picture-perfect in Blue MB-Tex vinyl and Zebrano wood veneers, it's a luxurious haven on wheels! ✨ #LuxuryCarsYVR #VancouverRides
Cruise in comfort with modern amenities like cruise control, power windows, and power door locks – this car is all about making your drive as smooth as the Vancouver skyline. ❤️ #CityCruisin #VanCityStyle
Beneath the hood, a robust 3.8-liter M116 V8 engine is ready to unleash power and torque, making every ride an exhilarating experience. #V8Power #ClassicCarLove
Own a piece of Vancouver's automotive history – the meticulously
-
47
1933 Willys pro street 350 dual 4barrel carb. 350 transmission. Nice paint, 9inch ford. lexon side windows. Tilt steering on S10 frame, new front end drives steers and stops good.
PHONE CALLS ONLY
Al Six Zero Four 644 6789
-
48
67 mustang Cal Special Clone,
Fresh paint and stripes
As seen car is literally new,new sheet metal starting from Trunk, inside outside,New Shelby Trunk Lid, Gas Tank,quarter panels, complete floor board one piece from rear to front with all new frame rails from rear to front,rockers, torque boxes,
Firewall to bumper all new sheet metal, new rad,etc, etc
0 miles on brand new Rebuilt 289 with brand new 4 B carb,
0 Miles on rebuilt transmission,New Hood,Bumpers,Wiring harnesses, etc etc..,
New interior kit , new seats upholstery,
Headliner, Dash stuff,
Absolutely no expense spared,only top quality Parts used.
Why buy your dream car that’s gonna need a restore coming up when you can get one that’s new.
Pictures taken various stages to give you an idea car was stripped to just chassis,built new to final stage
$60’s to do ……lowballing will be ignored
-
49
INEW COM M802 complete SSB package for offshore sailboat - read below for details
I purchased this for a boat project that did not happen and now it is time to let it go. The system consists of the following, all of which is brand new and never installed. All packages but one are unopened:
ICOM M802 unit consisting of tuning head, microphone, external speaker, and SSB unit ($1900 USD at West Marine)
GAM-MCKIM split lead antenna which slides up backstay without need for insulators or cutting backstay. Sells in usd for $465 at Seatech systems.
ICOM AT-140 automatic tuner, new in unopened box. Defender sells for $615USD
ICOM proprietary cabling to connect AT140 to SSB unit. Defender sells for $70USD
KISS SSB ground plane to use in lieu of under water ground plate ( ie no haulout needed to install). Seatech systems sells at $189USD.Value in $CAD: $4392
Asking price for complete kit: $2575 OBO
If you have your HAM license, ICOM will give you a code to open up the HAM bands for free.
-
50
Questus 400G self levelling radar mount for sailboat backstay, NEW, $750
I purchased this new for an offshore project boat that didn't happen. This is best of class, heavy cast aluminum, rated for offshore hurricanes. Current price from Questus Marine Inc in Peabody Mass. is $1999 USD (gulp!) All mounting hardware, install manual, etc included. Brand new, been in dry storage. Go offshore with the best!