Buy and sell, Tools with in Canada, Nova Scotia, Halifax.
-
1
tool box and variety of assorted tool.
-
2
I am selling a HILTI SIW 22T-A CORDLESS IMPACT WRENCH. Tool only (no battery or charger). This item is 100% new and never used without any scrapes or scratches. Was purchased for resale. More info included in the photos.
Retails for $329+tax
Selling for $ 200
Add will be removed once sold!
Will not respond to is this still available!
-
3
Brand new in box, never opened. Bought of Amazon and never opened. Not sure on how powerful it is I was gonna used it in my forge but I have since sold it. $75 Obo.
-
4
This is a Mastercraft tile saw with a guide fence. Works like new. New blade included. Offers
-
5
Goodall HD booster. Will start class 8 trucks with ease. This one is like new condition. Do your own research these work amazing.
-
6
Wood laminating system which enables user to laminate up to 60 bd feet per glue up. Generally 2 to 2 glue ups are possible per day. Maximum panel size is 3 feet x 6 feet with 4 clamps per panel
System includes 16 clamps manufactured in US. Clamps feature:
- jaws toed at one degree to ensure even pressure along glue surface
- all welding is electric arc
- each clamp exerts 3,00O lbs pressure
- current replacement cost, including shipping and duty, in excess of $250 Cdn each
- wall mounted rack is about 6’ by 6’ with 4 wall brackets to mount to stud wall and two floor brackets
- 5 levels on the rack for clamps
- replacement for custom designed wall mounted rack approx $2,000
- can be shipped FOB Halifax
-
7
A pair (2) of Bessey TWV28 30-17-2K Welding Table Clamps
12 Inch Capacity, Variable, 2K, STD Pad, for 28 mm Matrix Tables, for 28 mm Matrix Tables
$140 for the pair
Never used!
Please check out my other ads!
-
8
Craftsman shop vacuum. Work excellent. Asking $50.
-
9
Snap-On Insulated Work Jacket - Sz L
$75 obo
Genuine Snap-On. Brand New Unworn. Too Large for me. Insulated for use in Colder Weather. Insulated Hood. Embroidered Snap-On Logos and Canada Flag.
If Interested or any questions please contact via text or Kijiji Messenger/Email. Thanks for Looking!
-
10
Panasonic cordless screwdriver, 3.6 volt in new condition. $60
-
11
All used, in good shape.
Selling all together- Wire Ferrule Crimpers, ratching.
- Klien Katapult® Wire Stripper and Cutter for Solid and Stranded Wire
11063W
- Greenlee Paladin Tools 1317 RG58 and RG59 1300 Series Crimper
-
12
Ryobi P115 Intelliport 18v Volt ONE+ Plus NiCad Power Tool Battery Charger . Fits yellow generation of Ryobi 1 batteries (as shown but not included). Newer/grey Ryobi 1 batteries do not fit this charger.
I also have two yellow batteries available for $15 (for both). One is good 1.5Ah (18Wh) but other seems to hold little power. Batteries fit all generations of Ryobi 1 tools.
-
13
The center piece of the siastar system is the quick release adapter which fits any conventional angle or straight grinder. Using the adapter, you can change tools in seconds rather than minutes.
Tools with siastar®?
Eight high-quality, time-saving tools can be attached to the quick release adapter:Flap
Rough grinding
Deburring
Dressing of welding seams
Preparation of welding joints
Smooth grinding of jointsForm
Grinding of inner radii
Fine sanding
Smooth grinding of fillet weld
Vlies
Matting
Microfinishing of different metals
Structuring of metallic surfaces
Removing discoloration
Strip
Rust removal
Cleaning
Removing discoloration
Structuring
Cut
Cutting
Fiber
Smoothing of welding seams
Flattening of welding seams
Deburring and smooth grinding of joints
Belt
Treatment of hard-to-get-at stair areas
Treatment of hard-to-get-at handrails
Cleaning of tubes and shafts
Removing rust from tubes and shafts
Satin finishing of tubes and shafts
Wing
Deburring of drilled holes
Deburring of tube ends
Internal tube treatment
Satin finish
-
14
Rotary cross slide table complete with 3 jaw chuck (no chuck key)
-
15
I am helping my Father clear his basement out and there are 4 toolboxes with all the tool's included (shown in pictures), some of these tools are antiques and prices can be discussed when you see them. Please contact me and can arrange a time to meet (as my Father is elderly you must wear a mask while there).
I may have a nice 3 drawer one for sale that is mine and is in amazing shape.
These can be sold as a whole or by piece.
-
16
2 inch hardwood floor nailer.
-
17
O to20 inch electronic digital drum gauge brand new
Asking 700.00$ firm regular price 1200,00
-
18
Brand new dock ramp (10 tons ) is often used with forklift to load and unload cargo from trucks or containers
The ramp can be easily operated by one person , thus saving a lot of labor and improving work.
Efficiency suitable for factories , warehouses terminals ,logistics centres, stations,etc...
The surface is covered with a diamond shaped steel mesh of 8 mm thick, which makes a good anti slip function
Even in rainy and snowy days, it can be used normally
Product Features:
Platform is 5 mm thickness steel plate covered with 8mm thickness diamond steel mesh
Hydraulic cylinder: 2 pcs with NOK brand seal ring from Japan
The body and railing adopt high strength square steel pipe
Solid rubber wheels can use for long time Safety Device
With support legs for stable support of the dock ramp
With explosion-proof valve to prevent the platform from falling down suddenly when tube is broken
The ramp has a hydraulic overload protection to ensure that it doesn’t rise or fall when the load exceeds its rated load capacity
Overall weight is 3ton
The ramp is made with heavy duty steel, better quality than competitors
Lifting hight : 0.9-1.8M
Load capacity: 10T
Platform size:2000*10500MM
Overall dimension: 11000*2080*1400
Weight: 3T
https://www.capitalautoequipment.com
Price $10599
WE SELL 12T RAMP FOR $13999
CONTACT ONTARIO BRANCH (365) 888-3765/ (365)317-7933
CONTACT BRITISH COLUMBIA BRANCH (604)-314-9755
We ship throughout Canada
We are located in Hamilton, ON and Surrey, BC
loadingdock ramp , Forklift Ramps, Warehouse Ramps, Dock To Ground Ramps, PortableRamps, Mobile Docks And Dock Ramps
-
19
Black and Decker laser level and stud finder.
Like new.
Open to offers
-
20
Mastercraft 10 inch mitre saw with laser line. New in box
Saw features a vertical vise and sliding fence (which keeps out of your way for bevel cuts) to keep your cuts on the level. On the subject of bevels, the saw’s cutting angles stay true for years of perfect cutting. And it comes with a laser for extra accuracy. The only mitre saw you will ever need.Features
Mastercraft Mitre Saw features dual-bevelling: 0-45° left and rightDual sliding rails for crosscuts up to 12\" (30.5 cm) in width
Integrated laser line with on/off switch
Ergonomic rubberized D-handle
Sliding fence supports base, while easily sliding out of the way for bevel cuts
Positive stops at 0, 15, 22.5 and 31.6° and 45° left and right
Electric brake safely stops the blade in seconds
Vertical vise holds work piece securely
Includes: 10\" (25 cm) 40 tooth blade, dust bag and blade wrench
-
21
Brand new Dremel multi max oscillating tool
Tool only
-
22
30 ins. sheet metal bender with 4 in sheet metal shear. Removal to access hand bending roll.
$ 500.
-
23
1000Lb Princess Auto engine stand in good used condition
$75
-
24
Came with a set. Already have 3 so don't need this one. May meet in Dartmouth.
-
25
Pneumatic pipe bender with various dies. Unsure of exact die sizes.
Asking 600 or best offer
-
26
Used, still works great lots of power. Used Diablo blade still has some life left!
-
27
Craftsman 20 gal, 5 HP 220V air compressor. Works well BUT compressor head needs new gasket kit or a new head your choice everything else is good. Replaced tank and new regulator/dryer last yr. Bought new one so no longer needed. Air hose is not included, using that on my new one.
Between the 5HP Motor the $150 rebuildable regulator and the other parts are easily worth 200. Asking $200, no REASONABLE offer refused. Stupid lowball offers will be addressed accordingly.
-
28
Wood Lathe with many tools and accessories, everything you need to get started on wood turning.
-
29
NOCO Genius GB40 Boost+ Booster Pack/Jump Starter, 1000-Amp, 12V
Condition: New, Sealed Box
Location: Cole Harbour / Dartmouth
Terms: cash only (no EFTs), pick-up only, no holds, ad will be removed when item no longer available.Description:
• NOCO Genius GB40 Boost+, lithium-ion Jump Starter and Power Bank is ultra-safe and mistake-proof, making battery boosting easy for anyone from professional mechanics to those with little or no technical knowledge
• Ultra-Safe technology protects against sparks, reverse polarity, over-charging, over-current, open-circuits and over-heating
• Powerful 1000 peak amp rating is suitable for gas engines up to 6 litres and diesel engines up to 3 litres
• Can provide up to 20 jump starts on a single charge and tested at extremes of -30°C
• Manual override feature allows you to boost a battery drained down to 0 volts
• Recharge personal electronics such as smartphones and tablets, anytime, anywhere via the built-in 2.1A USB output
• Built-in ultra-bright 100 lumen dual LED flashlight with 7 light modes, including SOS and emergency strobe
• High-density NOCO Element lithium-ion battery holds its charge for up to 1 year and handles over 1000 recharge cycles
• Compact and lightweight so it can easily store in your vehicle or travel with you in your backpack
• Recharges in about 3 hours using the included USB car charger and can also be recharged from a laptop or phone charger (AC charger not included)
Includes:
• Instruction Manual
• Jumper Clamps
• Storage Bag
• USB Car Charger
Advanced Features:
• Built-in USB Output Charger
• Over-charge Protection
• Reverse Polarity
• Spark-proof
• Built-in Flashlight
• Strobe Light Mode
• Emergency Light Mode
• Manual Override
Asking $165 (New price $201 [$175+26 tax]).
-
30
2 Ton Beam Clamp bought for a project and never used. Brand new. $40
May trade, may meet in Dartmouth
-
31
On Sale @1299.99
reg price $1499.99
Manufactured in Prince George B.C. Canada
PTA-500 Product Specifications:
- Power supply voltage AC 110/220V Auto detection
- Power supply capacity 7.3 kVA
- Rated input current (TIG) 16.7 A
- Rated input current (MMA) 23 A
- Rated input current (CUT) 27 A
- Output current range (TIG) 10 - 200 A DC
- Output current range (MMA) 10 - 200 A
- Output current range (CUT) 10 - 50 A
- No-load voltage (TIG) 56 V
- No-load voltage (MMA) 56 V
- No-load voltage (CUT) 220 V
- Dia. of welding rodΦ(MMA) Max 5/32
- Arc initiation way (TIG) HF
- Arc initiation way (MMA) Touch
- Arc initiation way (CUT) HF
- Protection grade provided by enclosure IP 21
- No-load loss 50 W
- Power factor 0.93
- Insulation class F
- Duty cycle 70%
- Efficiency 85%
- Air pressure (CUT) 40-60 psi @ 4 CFM
- Gas flow (TIG) 2-5 L/min
- Gas flow (CUT) 100 L/min
- Cutting thickness (CUT) 3/4 inch @ 2.5 inches per Minute
- Weight 12 kg
- Dimension (mm) 420*210*300
What's In The Box?
- 1 piece x Ground Clamp
- 1 piece x Stick Holder
- 1 piece x Panasonic P80 torch 12ft
- 1 piece x Tig torch 12ft
- 3 sets consumables
- Regulator & water separator w/ pressor gauge
RJR Equipment Innovations LTD in a Canadian company designing quality welders and plasma cutters for the past 12 year. located in Prince George B.C
All our units come with a unbeatable 2 year replacement warranty. If you have any problems send it back to us COD and we will ship you a new unit when a tracking number is provided.
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept Visa MC AMEX and Etransfers give us a call 250.613.7523
WE WILL NOT ACCEPT CHEQUES
-
32
NORGEREN REGULATOR --NEW ,MODEL No. R12-400-RNLA INPUT 300 PSI OUTPUT 126 PSI Made in the USA.
-
33
Battery not included.
Keyless chuck Forward/Reverse selector conveniently located for inserting and removal tasks On-board magnetic storage for quick access to your driving bit 24 clutch positions virtually eliminate screw stripping
Convenient features, such as the built-in bubble level, magnetic tray for loose screws and accessories, and comfortable overmold grip make this a favorite drill/driver for accuracy and ease of use.
-
34
Great condition
$40
-
35
4 quantity , no Asian, annular cutters plus pilot guides. Three 15/16 and one 1 - 1/16" . Good condition
-
36
Stanley 85-721 Spark Plug Socket Set and Stanley 85-711 Accessory Tool set. Contains three 3/8" drive spark plug sockets (5/8", 3/4", 13/16") and a 1/2" to 3/8" reducer and 1/2" universal-joint.
Great additions to your tool box socket set. Never used.
Christmas gift?
-
37
Brand New - Just the saw, battery and blades not included.
Robust aluminium die-cast gear housing, coated for optimum handling
Slim, lightweight machine with softgrip handle for comfortable sawing in every working position
Saw blade rotatable by 180° for working comfortably overhead
Depth guide can be adjusted for the ideal utilisation of all the saw blade and diverse applications such as plunge cuts
-
38
HIlti DD VP- U01 Vacuum pump
Very little use practically brand new
Retails for about $2000
-
39
Brand new never used
-
40
on sale till jan 31
$1199.99
Regular price $1399.99
Manufactured in Prince George B.C. Canada
PC-34 Plasma Cutter Product Specifications:
Model: PC-34
- 60A Plasma Cutter (Air)
- DC INVERTER
- Uses Compressed Air needs 40-65 PSI @ 4CFM
- Dual Voltage 110 20amp/220V 30amp 50/60Hz Auto Detection
- Maximum Cut: 1 1/4" @ 4 inches per Minute
- ALL BRAND NEW Transistors/(IGBT)
- Duty Cycle 70% @ 60 Amp
- Power Factor: 0.93
- Efficiency: 85%
- Dimensions: 18.11 x 10.04 x 15.98"
- Pilot Arc
What's In The Box?
- 1 piece x Earth Clamp
- 1 piece x Panasonic P80 torch 12ft
- 2 sets cconsumables
- Regulator & water separator w/ pressure gauge
Ships in 1 day and takes 2-8 days to arrive within Canada
Check out our website for DEMO videos and specs
https://www.rjrequipmentinnovations.com/product/pc-34-plasma-cutter/All our units come with a unbeatable 2 year replacement warranty. If you have any problems send it back to us COD and we will ship you a new unit when a tracking number is provided.
RJR Equipment Innovations LTD in a Canadian company designing quality welders and plasma cutters for the past 12 year. Located in Prince George B.C
We can ship COD (Cash on Delivery) with Canada Post for a $15 fee
or We accept Visa, MC AMEX and Etransfers give us a call 250.613.7523
WE WILL NOT ACCEPT CHEQUES
-
41
Looking to buy a mitre gauge for my table saw. Make not important.
-
42
Other BENDER SHOWN IS NOT INCLUDED, ASKING $100 FOR TOTAL OF 2 BENDERS.
-
43
One metric and one imperial tap and die set from Busy Bee Tools for sale $40/ea OBO, regularly $50. New, never used.
-
44
Electric metal chop saw, comes with new blade
located Musquodoboit Harbour could be delivered for extra feecall 902 891 0842
-
45
1950`s Amp and Voltage Meter
If it is here on Kijiji.. I have it. $20.00 each
( April 2021 )
-
46
Veritas Router fence, 31 inches long.
-
47
Heavy duty snap on Creeper $100
-
48
Heavy duty snap on Creeper $100
-
49
Small battery charger. $30 obo
-
50
3.6 volt lithium 1/4" driver, skil , with charger, made by Bosch $20